1、 ETSI TS 102 314-7 V1.1.2 (2005-03)Technical Specification Fixed network Multimedia Messaging Service (F-MMS);Part 7: Over-The-Line configuration of F-MMS terminal settingsETSI ETSI TS 102 314-7 V1.1.2 (2005-03) 2 Reference RTS/AT-030041 Keywords ISDN, MMS, PSTN, SMS ETSI 650 Route des Lucioles F-06
2、921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.ets
3、i.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on
4、 ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.
5、etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the fore
6、going restriction extend to reproduction in all media. European Telecommunications Standards Institute 2005. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered b
7、y ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 102 314-7 V1.1.2 (2005-03) 3 Contents Intellectual Property Rights4 Foreword.4 Introduction 5 1 Scope 6 2 References 6 3 Definitions a
8、nd abbreviations.7 3.1 Definitions7 3.2 Abbreviations .7 4 Overview 8 5 User interaction 8 5.1 OTL configuration request .8 5.2 OTL configuration acceptance and rejection8 6 Functional description 9 6.1 Transport mechanism .9 6.2 Provisioning Document9 7 Provisioning document reference information .
9、10 7.1 Data Model.10 7.2 Use of the data model for F-MMS11 7.2.1 Characteristics of type NAPDEF11 7.2.2 Characteristics of type NAPAUTHINFO .12 7.2.3 Characteristics of type APPLICATION .12 7.2.4 Characteristics of type ACCESS 13 7.3 Provisioning document example 14 Annex A (informative): Bibliograp
10、hy.15 History 16 ETSI ETSI TS 102 314-7 V1.1.2 (2005-03) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members,
11、and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp).
12、 Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the presen
13、t document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Access and Terminals (AT). The present document is part 7 of a multi-part deliverable covering the Fixed network Multimedia Messaging Service (F-MMS), as identified below: TS 102 314-1: “Overview“; E
14、S 202 314-2: “PSTN/ISDN; Service description“; TR 102 314-3: “Network architecture and interconnection“; ES 202 314-4: “PSTN/ISDN; Multimedia Message communication between a fixed network Multimedia Messaging Terminal Equipment and a Multimedia Messaging Service Centre“; ES 202 314-5: “ISDN; Digital
15、 Subscriber Signalling System No. One (DSS1) protocol, Signalling System No.7 (SS7) - ISDN User Part (ISUP), and interworking between DSS1 and ISUP“; TR 102 314-6: “Control strings (service codes) for MMS functions and MMS supplementary services“; TS 102 314-7: “Over-The-Line configuration of F-MMS
16、terminal settings“; ES 202 314-8: “Combined PSTN/ISDN and broadband access and broadband access only; Service description“; ES 202 314-9: “Combined PSTN/ISDN Multimedia Message communication between a fixed network Multimedia Messaging Terminal Equipment and a Multimedia Messaging Service Centre“. N
17、OTE: The parts above refer to the active work items and published standards within ETSI. These work items do not include MMS over NGN. ETSI ETSI TS 102 314-7 V1.1.2 (2005-03) 5 Introduction Following the success of Multimedia Messaging Service (MMS) mobile networks, ETSI has produced a set of specif
18、ications to describe MMS for PSTN/ISDN. An overview about these specifications can be found in TS 102 314-1 1 The Multimedia Messaging Service for PSTN/ISDN as defined by ETSI follows the philosophy of adopting the existing Multimedia Messaging Service of the mobile networks as widely as possible to
19、: simplify the interworking with the existing mobile net MMS; offer the same user experience for both fixed and mobile net users; reduce the fixed net MMS implementation efforts. Following this philosophy, the configuration of F-MMS terminal settings as defined by the present document has been deriv
20、ed from the respective mechanisms used in mobile networks. ETSI ETSI TS 102 314-7 V1.1.2 (2005-03) 6 1 Scope The present document describes a mechanism for the configuration of F-MMS terminal settings by means of configuration messages. 2 References The following documents contain provisions which,
21、through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the la
22、test version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. 1 ETSI TS 102 314-1: “Fixed network Multimedia Messaging Service (F-MMS); Part 1: Overview“. 2 ETSI ES 202 314-4: “Fixed network Multime
23、dia Messaging Service (F-MMS); Part 4: PSTN/ISDN; Multimedia Message communication between a fixed network Multimedia Messaging Terminal Equipment and a Multimedia Messaging Service Centre“. 3 ETSI ES 201 986: “Services and Protocols for Advanced Networks (SPAN); Short Message Service (SMS) for PSTN
24、/ISDN; Service description“. 4 ETSI ES 201 912: “Access and Terminals (AT); Short Message Service (SMS) for PSTN/ISDN; Short Message Communication between a fixed network Short Message Terminal Equipment and a Short Message Service Centre“. 5 ETSI TS 103 912: “Access and Terminals (AT); Short Messag
25、e Service (SMS) for PSTN/ISDN; Short Message Communication between a fixed network Short Message Terminal Equipment and a Short Message Service Centre (Corrections to ES 201 912 V1.1.1)“. 6 ETSI ES 202 060-1: “Short Message Service (SMS) for fixed networks; Network Based Solution (NBS); Part 1: Over
26、view“. 7 OMA-WAP-ProvCont-v1-1-20021112-C: “Provisioning Content Version 1.1“. 8 OMA-WAP-ProvUAB-v1-1-20021113-C: “Provisioning User Agent Behaviour Version 1.1“. 9 WAP-192-WBXML-20010725-a: “Binary XML Content Format Specification“. 10 WAP-235-PushOTA-20010425-a: “Push OTA Protocol“. 11 Void. 12 IE
27、TF RFC 3629: “UTF-8, a transformation format of ISO 10646“. 13 WINA: “WAP Interim Naming Authority“, Open Mobile Alliance. ETSI ETSI TS 102 314-7 V1.1.2 (2005-03) 7 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: MM
28、S Relay/Server: MMS-specific network entity/application that is under the control of an MMS service provider. An MMS Relay/Server transfers messages, provides operations of the MMS that are specific to or required by the network environment and provides (temporary and/or persistent) storage services
29、 to the MMS. MMS User Agent: application residing on a fixed net or mobile net terminal or an external device that performs MMS-specific operations on a users behalf NOTE: An MMS User Agent is not considered part of an MMSE. MM Terminal: See MM Terminal Equipment. MM Terminal Equipment: containing a
30、n MMS User Agent and an appropriate MMS user interface provisioning document: particular instance of an XML document encoded according to 7 NOTE: In the present document, a provisioning document is coded in WBXML. WBXML document: XML document coded according to the “Binary XML Content Format Specifi
31、cation“ 9 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: 3GPP 3rd Generation Partnership Project APPID Application IDCHAP Challenge Handshake Authentication Protocol DTD Document Type Definition F-MMS Fixed network MMS F-MMSC Fixed network MMSC F-MMSE
32、Fixed network MMSE F-SMS Fixed network SMS F-SMSC Fixed network SMSC ID Identification ISDN Integrated Services Digital Network MD5 Message Digest 5 MM Multimedia Message MMS Multimedia Messaging Service MMSC Multimedia Message Service Centre MMSE Multimedia Messaging Service Environment MMTE Multim
33、edia Messaging Terminal Equipment NAP Network Access Point NAPDEF Network Access Point DEFinition NAPID Network Access Point IDentifier OMA Open Mobile Alliance OTA Over The Air OTL Over The Line PAP Password Authentication Protocol PSTN Public Switched Telephone Network RAS Remote Access Service SM
34、S Short Message Service SMSC Short Message Service Centre UBS1 User Based Solution, protocol 1 UCS Universal Character Set URI Uniform Resource Identifier ETSI ETSI TS 102 314-7 V1.1.2 (2005-03) 8 URL Uniform Resource Locator UTF UCS Transformation Format WAP Wireless Application Protocol WBXML WAP
35、Binary XML WSP Wireless Session Protocol XML eXtensible Markup Language4 Overview Over-The-Line (OTL) configuration is a process, by which a client is configured for different services and applications with a minimum of user interaction. It is directly derived from the Over-The-Air (OTA) configurati
36、on mechanism known from mobile networks (see e.g. 10). The OTL configuration mechanism described in the present document allows the configuration of F-MMS terminal settings like network access point or service URL by means of configuration messages. The OTL configuration information is transported u
37、sing push mechanisms suitable for fixed net environments as defined in the present document. The OTL configuration information is represented using provisioning documents formatted according to 7. The mechanism described in the present document uses connectionless WAP push messages according to 10 t
38、hat contain provisioning documents in binary (recommended) or textual XML format according to 9 coded in the character set UTF-8 as defined in RFC 3629 12. 5 User interaction 5.1 OTL configuration request The user may request OTL configuration e.g. by: calling a special phone number; sending an SMS
39、to a special destination; requesting a configuration message on a providers website; other means. The definition of the means by which an OTL configuration can be requested by the user is up to the service provider. 5.2 OTL configuration acceptance and rejection In order to avoid unwanted re-configu
40、ration of terminals, terminals implementing the OTL mechanism described in the present document shall provide the possibility for the user to accept or reject an incoming OTL configuration message. ETSI ETSI TS 102 314-7 V1.1.2 (2005-03) 9 6 Functional description 6.1 Transport mechanism In principl
41、e, the OTL configuration mechanism is independent from the transport mechanism used. In PSTN/ISDN, similar to the transportation mechanism for push-based MMS transactions (see ES 202 314-4 2, clause 7.2, the OTL configuration information shall be transferred using the fixed net Short Message Service
42、 defined in ES 201 986 3, ES 201 912 4, TS 103 912 5 (UBS1) and ES 202 060-1 6 (NBS using UBS1 coding). The OTL configuration information is transported within a WAP PUSH message carried by SMS. According to 7, the WAP PUSH content types “application/vnd.wap.connectivity-wbxml“ respectively “text/vn
43、d.wap.connectivity-xml“ apply. To transport this WAP PUSH message containing the OTL configuration information, the basic SMS transfer mechanism is used. To indicate the presence of the WAP PUSH message, the PDU values contained in the SMS Transfer Layer message SMS_DELIVER transmitted to the MMTE s
44、hall be used as defined below: TP-DCS shall be set to “8 bit, uncompressed“ (e.g. 04 hex). TP-UDHI shall be set to “UDH present“ (1bin). TP-UD shall contain a User Data Header (UDH) as well as the WAP PUSH message. The User Data Header (UDH) shall contain the information element “Application port ad
45、dressing scheme, 16 bit address“ (05 hex). The Source Port within this information element should be set to “WAP connectionless session service“ (9 200 dec), while the Destination Port shall be set to “WAP PUSH“ (2 948 dec). Both given port numbers are defined by IANA (see http:/www.iana.org/assignm
46、ents/port-numbers). Depending on the size of the WAP PUSH message, the use of Short Message Concatenation may be necessary. Both information elements “Concatenated short messages, 8-bit reference number“ (00 hex) or “Concatenated short message, 16-bit reference number“ (08 hex) may be used in this c
47、ase. 6.2 Provisioning Document A provisioning document is a particular instance of an XML document encoded according to 7. The provisioning document serves to carry a set of configuration parameters. The structure and content of the provisioning document used for OTL configuration of F-MMS settings
48、is described in clause 7 of the present document. The provisioning document can contain values for all configuration parameters listed in clause 8.1.4 of ES 202 314-4 2. These are: F-SMSC number; RAS (F-MMS gateway) dial-in number (send); RAS (F-MMS gateway) dial-in number (receive); Username; Passw
49、ord; MM Relay/Server URL. ETSI ETSI TS 102 314-7 V1.1.2 (2005-03) 107 Provisioning document reference information The data model used for the OTL configuration of F-MMS settings is based on the existing WAP Document Type Definition (DTD). The provisioning document structure therefore corresponds to the structure described in 7. 7.1 Data Model The provisioning document structure used for the OTL configuration of F-MMS settings is a subset of the structure defined in 7. Tables
