1、 ETSI TS 102 486-1-3 V1.2.1 (2008-10)Technical Specification Intelligent Transport Systems (ITS);Road Transport and Traffic Telematics (RTTT);Test specifications for Dedicated ShortRange Communication (DSRC) transmission equipment;Part 1: DSRC data link layer:medium access and logical link control;S
2、ub-Part 3: Abstract Test Suite (ATS) and partial PIXIT proformafloppy3ETSI ETSI TS 102 486-1-3 V1.2.1 (2008-10) 2Reference RTS/ITS-0040007 Keywords ITS, DSRC, MAC, LLC, protocol, testing, ATS, TTCN, PIXIT ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax
3、: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than o
4、ne electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network dr
5、ive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present
6、 document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European
7、 Telecommunications Standards Institute 2008. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Orga
8、nizational Partners. ETSI ETSI TS 102 486-1-3 V1.2.1 (2008-10) 3Contents Intellectual Property Rights 8g3Foreword . 8g31 Scope 9g32 References 9g32.1 Normative references . 9g32.2 Informative references 10g33 Definitions and abbreviations . 10g33.1 Definitions 10g33.2 Abbreviations . 10g34 Abstract
9、Test Method (ATM) . 11g34.1 DSRC MAC layer Abstract Test Method (ATM) for OBU . 11g34.1.1 Test architecture 11g34.1 DSRC MAC layer Abstract Test Method (ATM) for RSU 11g34.1.1 Test architecture 12g34.2 DSRC LLC layer Abstract Test Method (ATM) 12g34.2.1 Test architecture 13g34.2 Test strategy . 13g3
10、5 Untestable Test Purposes (TP) . 14g36 ATS conventions 14g36.1 Naming conventions . 14g36.1.1 Declarations part. 14g36.1.1.1 General 14g36.1.1.2 Test suite operations 14g36.1.1.3 Test suite parameter declarations 15g36.1.1.4 Test case selection expression definition 15g36.1.1.5 Test suite constant
11、declarations . 15g36.1.1.6 Test suite variable declarations . 15g36.1.1.7 Test case variable declarations 15g36.1.1.8 Timer declarations . 15g36.1.1.9 ASP type definitions . 15g36.1.1.10 PDU type definitions . 15g36.1.1.11 Co-ordination Message (CM) type definitions 15g36.1.1.12 Alias definitions 15
12、g36.1.2 Constraints part . 16g36.1.2.1 General 16g36.1.2.2 TTCN ASN.1 Constraints . 16g36.1.2.3 TTCN ASP Constraints . 16g36.1.2.4 TTCN PDU Constraints 16g36.1.3 Dynamic part 16g36.1.3.1 General 16g36.1.3.2 Test Case (TC) identifier . 16g36.1.3.3 Test step identifier . 16g36.1.3.4 Default identifier
13、 . 17g36.2 Implementation conventions 17g36.2.1 Declaration part 17g36.2.2 Constraint part 17g36.2.3 Dynamic part 17g3Annex A (normative): Abstract Test Suite (ATS) for MAC OBU . 18g3A.1 The TTCN Graphical form (TTCN.GR) 18g3A.2 The TTCN Machine Processable form (TTCN.MP) 18g3ETSI ETSI TS 102 486-1-
14、3 V1.2.1 (2008-10) 4A.3 Specification of PTC1 18g3A.3.1 General requirements . 18g3A.3.2 Additional requirements . 18g3Annex B (normative): Abstract Test Suite (ATS) for MAC RSU 20g3B.1 The TTCN Graphical form (TTCN.GR) 20g3B.2 The TTCN Machine Processable form (TTCN.MP) 20g3B.3 Specification of PTC
15、1 20g3B.3.1 General requirements . 20g3B.3.2 Additional requirements . 20g3Annex C (normative): Abstract Test Suite (ATS) for LLC OBU 21g3C.1 The TTCN Graphical form (TTCN.GR) 21g3C.2 The TTCN Machine Processable form (TTCN.MP) 21g3Annex D (normative): Abstract Test Suite (ATS) for LLC RSU . 22g3D.1
16、 The TTCN Graphical form (TTCN.GR) 22g3D.2 The TTCN Machine Processable form (TTCN.MP) 22g3Annex E (normative): Partial PIXIT proforma for MAC OBU 23g3E.1 Identification summary. 23g3E.2 ATS summary 23g3E.3 Test laboratory 23g3E.4 Client identification 23g3E.5 SUT 24g3E.6 Protocol layer information
17、24g3E.6.1 Protocol identification 24g3E.6.2 IUT information . 24g3Annex F (normative): Partial PIXIT proforma for MAC RSU. 25g3F.1 Identification summary. 25g3F.2 ATS summary 25g3F.3 Test laboratory 25g3F.4 Client identification 25g3F.5 SUT 26g3F.6 Protocol layer information 26g3F.6.1 Protocol ident
18、ification 26g3F.6.2 IUT information . 26g3Annex G (normative): Partial PIXIT proforma for LLC OBU . 27g3G.1 Identification summary. 27g3G.2 ATS summary 27g3G.3 Test laboratory 27g3G.4 Client identification 27g3G.5 SUT 28g3G.6 Protocol layer information 28g3G.6.1 Protocol identification 28g3ETSI ETSI
19、 TS 102 486-1-3 V1.2.1 (2008-10) 5G.6.2 IUT information . 29g3Annex H (normative): Partial PIXIT proforma for LLC RSU 30g3H.1 Identification summary. 30g3H.2 ATS summary 30g3H.3 Test laboratory 30g3H.4 Client identification 30g3H.5 SUT 31g3H.6 Protocol layer information 31g3H.6.1 Protocol identifica
20、tion 31g3H.6.2 IUT information . 32g3Annex I (normative): PCTR Proforma for MAC OBU . 33g3I.1 Identification summary. 33g3I.1.1 Protocol conformance test report 33g3I.1.2 IUT identification . 33g3I.1.3 Testing environment . 33g3I.1.4 Limits and reservation 34g3I.1.5 Comments. 34g3I.2 IUT Conformance
21、 status 34g3I.3 Static conformance summary . 34g3I.4 Dynamic conformance summary 35g3I.5 Static conformance review report . 35g3I.6 Test campaign report 36g3I.7 Observations . 36g3Annex J (normative): PCTR Proforma for MAC RSU . 37g3J.1 Identification summary. 37g3J.1.1 Protocol conformance test rep
22、ort 37g3J.1.2 IUT identification . 37g3J.1.3 Testing environment . 37g3J.1.4 Limits and reservation 38g3J.1.5 Comments. 38g3J.2 IUT Conformance status 38g3J.3 Static conformance summary . 38g3J.4 Dynamic conformance summary 39g3J.5 Static conformance review report . 39g3J.6 Test campaign report 40g3
23、J.7 Observations . 40g3Annex K (normative): PCTR Proforma for LLC OBU 41g3K.1 Identification summary. 41g3K.1.1 Protocol conformance test report 41g3K.1.2 IUT identification . 41g3K.1.3 Testing environment . 41g3K.1.4 Limits and reservation 42g3K.1.5 Comments. 42g3K.2 IUT Conformance status 42g3ETSI
24、 ETSI TS 102 486-1-3 V1.2.1 (2008-10) 6K.3 Static conformance summary . 42g3K.4 Dynamic conformance summary 43g3K.5 Static conformance review report . 43g3K.6 Test campaign report 43g3K.7 Observations . 44g3Annex L (normative): PCTR Proforma for LLC RSU . 45g3L.1 Identification summary. 45g3L.1.1 Pr
25、otocol conformance test report 45g3L.1.2 IUT identification . 45g3L.1.3 Testing environment . 45g3L.1.4 Limits and reservation 46g3L.1.5 Comments. 46g3L.2 IUT Conformance status 46g3L.3 Static conformance summary . 46g3L.4 Dynamic conformance summary 47g3L.5 Static conformance review report . 47g3L.
26、6 Test campaign report 47g3L.7 Observations . 48g3Annex M (normative): Profile requirements for MAC OBU 49g3M.1 Generic test cases . 49g3M.2 Specific test cases . 49g3M.3 Non relevant test cases . 49g3M.4 Modified test campaign report . 50g3M.5 Observations . 50g3Annex N (normative): Profile require
27、ments for MAC RSU 51g3N.1 Generic test cases . 51g3N.2 Specific test cases . 51g3N.3 Non relevant test cases . 51g3N.4 Modified test campaign report . 52g3N.5 Observations . 52g3Annex O (normative): Profile requirements for LLC OBU . 53g3O.1 Generic test cases . 53g3O.2 Specific test cases . 53g3O.3
28、 Non relevant test cases . 53g3O.4 Modified test campaign report . 53g3O.5 Observations . 54g3Annex P (normative): Profile requirements for LLC RSU 55g3P.1 Generic test cases . 55g3P.2 Specific test cases . 55g3ETSI ETSI TS 102 486-1-3 V1.2.1 (2008-10) 7P.3 Non relevant test cases . 55g3P.4 Modified
29、 test campaign report . 55g3P.5 Observations . 56g3Annex Q (informative): Bibliography . 57g3History 58g3ETSI ETSI TS 102 486-1-3 V1.2.1 (2008-10) 8Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining
30、to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat.
31、Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the upd
32、ates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Intelligent Transport System(ITS). The present document is part 1, sub-part 3 of a multi-part deliverable cove
33、ring Intelligent Transport Systems (ITS); Dedicated Short Range Communication (DSRC); Data Link Control (DLC) layer as identified below: Part 1: “DSRC data link layer: medium access and logical link control“; Sub-part 1: “Protocol Implementation Conformance Statement (PICS) proforma specification“;
34、Sub-part 2: “Test Suite Structure and Test Purposes (TSS Sub-part 3: “Abstract Test Suite (ATS) and partial PIXIT proforma“. Part 2: “DSRC application layer“. ETSI ETSI TS 102 486-1-3 V1.2.1 (2008-10) 91 Scope The present document contains the Abstract Test Suite (ATS) and partial PIXIT proforma to
35、test the Dedicated Short Range Communication (DSRC); Data Link Control (DLC) layer. The objective of this test specification is to provide a basis for conformance tests for DSRC equipment giving a high probability of inter-operability between different manufacturers equipment. The ISO standard for t
36、he methodology of conformance testing (ISO/IEC 9646-1 4, ISO/IEC 9646-2 5 and ISO/IEC 9646-3 6) as well as the ETSI rules for conformance testing (ETS 300 406 3) are used as a basis for the test methodology. 2 References References are either specific (identified by date of publication and/or editio
37、n number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. Non-specific reference may be made only to a complete document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all future changes of the re
38、ferenced document for the purposes of the referring document; - for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. For online referenced documents, information sufficient to identif
39、y and locate the source shall be provided. Preferably, the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the method of
40、access to the referenced document and the full network address, with the same punctuation and use of upper case and lower case letters. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references Th
41、e following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 CEN EN 12795 (2003): “Road transport
42、and traffic telematics - Dedicated Short Range Communication (DSRC) - DSRC data link layer: medium access and logical link control“. 2 CEN EN 13372 (2003): “Road transport and traffic telematics (RTTT) - Dedicated short-range communication - Profiles for RTTT“. 3 ETSI ETS 300 406: “Methods for Testi
43、ng and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 4 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 5 ISO/IEC 9646-2: “Information tech
44、nology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite Specification“. ETSI ETSI TS 102 486-1-3 V1.2.1 (2008-10) 106 ISO/IEC 9646-3: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - P
45、art 3: The Tree and Tabular Combined Notation (TTCN)“. 7 ISO/IEC 9646-5: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 5: Requirements on test laboratories and clients for the Conformance Assessment process“. 8 ISO/IEC 9646-6: “Informat
46、ion technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 6: Protocol Profile Test Specification“. 9 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance
47、statement“. 2.2 Informative references The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) appl
48、ies. Not applicable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-1 4, EN 12795 1, EN 13372 2 and the following apply: blocked signal: signal without clock and bit information, e.g. a very weak signal 3.2 Ab
49、breviations For the purposes of the present document, the abbreviations given in ISO/IEC 9646-1 4, ISO/IEC 9646-6 8, ISO/IEC 9646-7 9, EN 12795 1, EN 13372 2 and the following apply: ASP Abstract Service Primitive ATM Abstract Test Method ATS Abstract Test Suite BI Invalid BehaviourBV Valid Behaviour CM Co-ordination Message CP Co-ordination Point IUT Implementation Under Test LT Lower Tester MTC Master Test Component PCO Point of Control and Observation PHL Physical Layer PrWA MAC frame Private Window Allocation PrWRq MAC frame Pr
