1、 ETSI TS 124 083 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Call Waiting (CW) and Call Hold (HOLD) supplementary services; Stage 3 (3GPP TS 24.083 version 15.0.0 Release 15) TECHNICAL SPECIFICATION GLOBAL SYSTEM F
2、OR MOBILE COMMUNICATIONSRETSI ETSI TS 124 083 V15.0.0 (2018-07)13GPP TS 24.083 version 15.0.0 Release 15Reference RTS/TSGC-0424083vf00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF
3、742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic
4、and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) vers
5、ion kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableSt
6、atus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photo
7、copying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTS
8、TM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are tra
9、demarks registered and owned by the GSM Association. ETSI ETSI TS 124 083 V15.0.0 (2018-07)23GPP TS 24.083 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertain
10、ing to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretari
11、at. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on th
12、e ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the
13、property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS
14、) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cro
15、ss reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as descri
16、bed in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 124 083 V15.0.0 (2018-07)33GPP TS 24.083 version 15.0.0 Release 15Contents Intellectual Property
17、Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g30 Scope 5g30.1 References 5g30.2 Abbreviations . 6g31 Call Waiting (CW) . 6g31.1 Waiting call indication and confirmation . 6g31.2 Normal operation with successful outcome 7g31.2.1 Waiting call accepted; existing call released 7g31.2.2
18、 Waiting call accepted; existing call on hold . 7g31.2.3 Existing call released by user A; waiting call accepted 8g31.3 Normal operation with unsuccessful outcome 8g31.3.1 Waiting call released by subscriber B . 8g31.3.2 Waiting call released by calling user C . 9g31.3.3 Waiting call times out . 9g3
19、1.3.4 No reply condition timer expires 9g31.4 Activation . 9g31.5 Deactivation . 9g31.6 Interrogation . 10g31.7 Invocation . 11g31.8 Registration and erasure . 11g32 Call Hold (HOLD) . 11g32.1 Normal operation 11g32.1.1 Hold and retrieve functions . 11g32.1.2 Hold invocation 12g32.1.3 Retrieve proce
20、dure 12g32.1.4 Alternate from one call to the other 13g32.1.5 Auxiliary states for hold and retrieve 14g32.1.6 An example of dimensioned state space . 15g32.2 Activation and deactivation 15g32.3 Registration, erasure and interrogation . 15g3Annex A (informative): Change history . 16g3History 17g3ETS
21、I ETSI TS 124 083 V15.0.0 (2018-07)43GPP TS 24.083 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3GPP. This TS specifies the procedures used at the radio interface for normal operation, registration, erasure, activation, deactivation, invocation and interrog
22、ation of call completion supplementary services within the 3GPP system. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of this TS, it will be re-released by the TSG with an identifyin
23、g change of release date and an increase in version number as follows: Version 3.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 Indicates TSG approved document under change control. y the second digit is incremented for all changes of substance,
24、i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the specification; ETSI ETSI TS 124 083 V15.0.0 (2018-07)53GPP TS 24.083 version 15.0.0 Release 150 Scope The present document specifies the procedures used
25、at the radio interface (Reference point Um as defined in 3GPP TS 24.002) for normal operation, registration, erasure, activation, deactivation, invocation and interrogation of call completion supplementary services. Provision and withdrawal of supplementary services is an administrative matter betwe
26、en the mobile subscriber and the service provider and cause no signalling on the radio interface. In 3GPP TS 24.010 the general aspects of the specification of supplementary services at the layer 3 radio interface are given. 3GPP TS 24.080 specifies the formats and coding for the supplementary servi
27、ces. Definitions and descriptions of supplementary services are given in 3GPP TS 22.004 and 3GPP TS 22.08x and 3GPP TS 22.09x-series. 3GPP TS 22.083 is related specially to call completion supplementary services. Technical realization of supplementary services is described in 3GPP TS 23.011 and GSM
28、03.8x and GSM 03.9x-series. 3GPP TS 23.083 is related specially to call completion supplementary services. The procedures for Call Control, Mobility Management and Radio Resource management at the layer 3 radio interface are defined in 3GPP TS 24.007 and 3GPP TS 24.008. The following supplementary s
29、ervices belong to the call completion supplementary services and are described in the present document: - Call waiting (CW) (clause 1); - Call hold (HOLD) (clause 2). 0.1 References The following documents contain provisions which, through reference in this text, constitute provisions of the present
30、 document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP docum
31、ent (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 22.004: “General on supplementary services“. 3 3GPP TS 22.081: “Line identi
32、fication supplementary services - Stage 1“. 4 3GPP TS 22.082: “Call Forwarding (CF) supplementary services - Stage 1“. 5 3GPP TS 22.083: “Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 1“. 6 3GPP TS 22.084: “MultiParty (MPTY) supplementary services - Stage 1“. 7 3GPP TS 22.085
33、: “Closed User Group (CUG) supplementary services - Stage 1“. 8 3GPP TS 22.086: “Advice of charge (AoC) supplementary services - Stage 1“. 9 3GPP TS 22.088: “Call Barring (CB) supplementary services - Stage 1“. 10 3GPP TS 22.090: “Unstructured Supplementary Services Data (USSD) - Stage 1“. 11 3GPP T
34、S 22.091: “ECT supplementary services operation - Stage 1“. ETSI ETSI TS 124 083 V15.0.0 (2018-07)63GPP TS 24.083 version 15.0.0 Release 1512 3GPP TS 23.011: “Technical realization of supplementary services“. 13 3GPP TS 23.081: “Line identification supplementary services - Stage 2“. 14 3GPP TS 23.08
35、2: “Call Forwarding (CF) supplementary services - Stage 2“. 15 3GPP TS 23.083: “Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 2“. 16 3GPP TS 23.084: “MultiParty (MPTY) supplementary services - Stage 2“. 17 3GPP TS 23.085: “Closed User Group (CUG) supplementary services - Stag
36、e 2“. 18 3GPP TS 23.086: “Advice of Charge (AoC) supplementary services - Stage 2“. 19 3GPP TS 23.088: “Call Barring (CB) supplementary services - Stage 2“. 20 3GPP TS 23.090: “Unstructured supplementary services operation - Stage 2“. 21 3GPP TS 23.091: “Explicit Call Transfer (ECT) supplementary se
37、rvice - Stage 2“. 22 3GPP TS 24.002: “GSM-UMTS Public Land Mobile Network (PLMN) Access Reference Configuration“. 23 3GPP TS 24.007: “Mobile radio interface signalling layer 3; General aspects“. 24 3GPP TS 24.008: “Mobile radio interface layer 3 specification“. 25 3GPP TS 24.010: “Mobile radio inter
38、face layer 3; Supplementary services specification; General aspects“. 26 3GPP TS 24.080: “Mobile radio interface layer 3 supplementary services specification; Formats and coding“. 27 3GPP TS 24.082: “Call Forwarding (CF) supplementary services - Stage 3“. 0.2 Abbreviations Abbreviations used in the
39、present document are listed in 3GPP TR 21.905. 1 Call Waiting (CW) 1.1 Waiting call indication and confirmation When this service is activated for the controlling subscriber B and the B-subscriber has calls only in states U10 (Active) or U26 (MO Modify) as defined in 3GPP TS 24.008, the arrival of a
40、n incoming call from subscriber C shall, if no other call is waiting be signalled to the mobile station B by a normal call indication. In that case the network and the mobile station shall act in accordance with 3GPP TS 24.008. The transaction identifier shall be the transaction identifier (C-B) all
41、ocated to the waiting call and must not be the same as the transaction identifier (A-B) for the already existing call (see figure 1.1). In the CALL CONFIRMED message sent to the network the Cause information element shall be included with cause #17 “user busy“ (see figure 1.1). When the ALERTING mes
42、sage is received by the network the call waiting timer T2 shall be started or if call forwarding on no reply is activated for the B-subscriber the no reply condition timer T3 shall be started. If the network received a non-zero SS Screening indicator from the calling users mobile station the ALERTIN
43、G/FACILITY message sent to a calling mobile user shall include the Facility information element with an invoke of the Notification operation indicating that the call is waiting (see figure 1.2). If the network did not receive a non-zero SS Screening indicator from the calling users mobile station it
44、 shall not send a notification, i.e. either the ALERTING message does not include the Notification operation or the FACILITY message is omitted. ETSI ETSI TS 124 083 V15.0.0 (2018-07)73GPP TS 24.083 version 15.0.0 Release 15MS Network SETUP .Transaction identifier(C-B). .Cause #17 (user busy). ALERT
45、ING - .Transaction identifier(C-B). start T2/T3 NOTE: The SETUP message shall include a “Signal Information“ element with value #7 (call waiting tone on). This shall be used by the MS to generate an appropriate call waiting indication. Figure 1.1: Call indication to the mobile station on arrival of
46、an incoming call and call confirmation from the mobile station MS Network SETUP - CALL PROCEEDING .Transaction identifier(A-B). HOLD ACKNOWLEDGE .Transaction identifier(C-B). stop T2/T3 CONNECT ACKNOWLEDGE Facility (Invoke = ActivateSS (CW, BasicServiceCode) RELEASE COMPLETE Facility (Invoke = Deact
47、ivateSS (CW, BasicServiceCode) RELEASE COMPLETE Facility (Invoke = InterrogateSS (CW) RELEASE COMPLETE HOLD ACKNOWLEDGE RETRIEVE ACKNOWLEDGE RETRIEVE (TI A-C) - HOLD ACKNOWLEDGE (TI A-B) New Version Subject/Comment Apr 1999 GSM 04.83 6.0.0 Transferred to 3GPP CN1 CN#03 24.083 R99 3.0.0 Approved at C
48、N#03 CN#11 24.083 3.0.0 Rel-4 4.0.0 Release 4 after CN#11 CN#16 24.083 4.0.0 Rel-4 4.0.1 References updated CN#16 24.083 4.0.1 Rel-5 5.0.0 Rel-5 created after CN#16 CN#26 24.083 6.0.0 Rel-6 6.0.0 Rel-6 created after CN#26 CT#36 24.083 6.0.0 Rel-7 7.0.0 Upgraded unchanged from Rel-6 CT#42 24.083 7.0.0 Rel-8 8.0.0 Upgraded unchanged from Rel-7 2009-12 24.083 8.0.0 - Rel-9 9.0.0 Update to Rel-9 version (MCC) 2011-03 24.083 9.0.0 - Rel-10 10.0.0 Update to Rel-10 version (M
