1、 ETSI TS 186 006-3 V3.1.1 (2012-01) IMS Network Testing (INT); Originating Identification Presentation (OIP) and Originating Identification Restriction (OIR) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance Testing; Part 3: Abstract Test Suite (ATS) and partial Protocol Implementati
2、on eXtra Information for Testing (PIXIT) proforma specification floppy3Technical Specification ETSI ETSI TS 186 006-3 V3.1.1 (2012-01)2Reference RTS/INT-000025-3 Keywords ATS, IMS, OIP, OIR, PIXIT, SIP, TESTING, TTCN ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92
3、94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in
4、 more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specifi
5、c network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in
6、 the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all med
7、ia. European Telecommunications Standards Institute 2012. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organization
8、al Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 186 006-3 V3.1.1 (2012-01)3Contents Intellectual Property Rights 4g3Foreword . 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 6g33 Definitions and abbre
9、viations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Abstract Test Method (ATM) . 6g34.1 Configurations for testing UE 7g35 The ATS development process . 7g35.1 Requirements and Test Purposes 7g35.2 ATS structure . 7g35.2.1 Test case grouping 7g35.2.2 Test case identifiers 7g35.3 ATS specificat
10、ion framework . 8g35.3.1 ATS Library 8g35.3.2 Use of TTCN-3 . 9g3Annex A (normative): Partial PIXIT proforma 10g3A.1 Introduction 10g3A.2 PIXIT items 10g3A.2.1 PIXIT for UE Testing . 10g3A.2.2 PIXIT for AS Testing . 11g3A.2.3 PIXIT for S-CSCF Testing . 11g3A.2.4 General PIXIT 11g3Annex B (informativ
11、e): TTCN-3 library modules . 12g3B.1 Electronic annex, zip file with TTCN-3 code 12g3Annex C (informative): Validation Report 13g3C.1 Test Suite Validation Level 13g3C.2 TTCN-3 Edition . 13g3C.3 TTCN-3 Tool(s) . 13g3C.3.1 TTCN-3 Tool Elvior TestCast13g3C.3.1.1 Identification of the TTCN-3 Tool Elvio
12、r TestCast13g3C.3.1.2 Compilation status 13g3C.3.2 TTCN-3 Tool EricssonTitan 13g3C.3.2.1 Identification of the TTCN-3 Tool EricssonTitan . 13g3C.3.2.2 Compilation status 13g3C.3.3 TTCN-3 Tool Testing Technologies TTWorkbench14g3C.3.3.1 Identification of the TTCN-3 Tool Testing Technologies TTWorkben
13、ch14g3C.3.3.2 Compilation status 14g3C.3.4 Test Platform(s) 14g3History 15g3ETSI ETSI TS 186 006-3 V3.1.1 (2012-01)4Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any,
14、 is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on
15、the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may b
16、e, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee IMS Network Testing (INT). The present document is part 3 of a multi-part deliverable covering Originating Identification Presentation (OIP) and Originating I
17、dentification Restriction (OIR), as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specificati
18、on“. ETSI ETSI TS 186 006-3 V3.1.1 (2012-01)51 Scope The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma based on the Test Suite Structure and Test Purposes defined in TS 186 006-2 2. The test notation used i
19、n the ATS is TTCN-3 (see ES 201 873-1 7). The following test specification and design considerations can be found in the body of the present document: the overall test suite structure; the testing architecture; the test methods and port definitions; the test configurations; the design principles, as
20、sumptions, and used interfaces to the TTCN3 tester (System Simulator); TTCN styles and conventions; the partial PIXIT proforma; the modules containing the TTCN-3 ATS. Annex A provides the Partial Implementation Extra Information for Testing (PIXIT) Proforma of the ATS. Annex B provides the Testing a
21、nd Test Control Notation (TTCN-3) part of the ATS. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
22、reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot g
23、uarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of the present document. 1 ETSI TS 124 607: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Originating Ide
24、ntification Presentation (OIP) and Originating Identification Restriction (OIR) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.607 version 8.4.0 Release 8)“. 2 ETSI TS 186 006-2 (V3.1.1): “Technical Committee for IMS Network Testing (INT); Originating Identi
25、fication Presentation (OIP) and Originating Identification Restriction (OIR) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance Testing; Part 2: Test Suite Structure and Test Purposes (TSS Network Integration Testing; IMS specific use of Session Initiation Protocol (SIP) and Session D
26、escription Protocol (SDP); Conformance Testing; Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. ETSI ETSI TS 186 006-3 V3.1.1 (2012-01)64 IETF RFC 3261 (2002): “SIP: Session Initiation Protocol“. 5 ISO/IEC 9646-1: “
27、Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 6 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“
28、. 7 ETSI ES 201 873-1 (V4.3.1): “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language“. 8 ETSI TS 102 351 (V2.1.1): “Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT); IPv6 Testing: Methodology and Frame
29、work“. 9 ETSI TS 102 587-2: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Peer-to-Peer Digital Private Mobile Radio; Part 2: Test Suite Structure and Test Purposes (TSS they are based on the names provided in clause 4 of TS 186 006-2 2, but use the nami
30、ng conventions defined for the ATS (see clause 5.2.2). Table 1: OIP/OIR ATS structure OIP/OIR CallingUser OIP_U01_xxx alledUser OIP_U02_xxxAS_OrigUser OIP_N01_xxx AS_TermUser OIP_N02_xxx5.2.2 Test case identifiers The test case names are built up according to the following scheme: “_“_“ ETSI ETSI TS
31、 186 006-3 V3.1.1 (2012-01)8where: a) double quotes (“) are used to enclose literal strings; b) is the group index in Table 1 (which uniquely identifies the path of groups/subgroups); c) is a running 3-digit decimal number, starting in each subgroup path with “001“. EXAMPLE: TC_OIP_N01_001: i) the i
32、dentifier has Group index “OIP_N01“, i.e. it is in the subgroup having complete path: SupplementaryServices_OIP_OIR/AS_OrigUser; ii) the identifier is the first test case of this group/subgroup. NOTE: This naming scheme provides a 1-1 correspondence of TP identifiers as defined in TS 186 006-2 2 and
33、 test case names. The TP identifier of TC_OIP_N01_001 is TP OIP_N01_001. 5.3 ATS specification framework 5.3.1 ATS Library For this ATS the TTCN-3 library modules are basically organized as: 1) AtsCommon modules. 2) LibIms modules. 3) LibSip modules (RFC 3261 4). 4) LibCommon modules (taken from an
34、improved version of TS 102 351 8). NOTE: Due to the common LibSip and LibIms library approach with some other parallel running projects there is necessary to create tag version of all library modules. Table 2 shows the organization of the ATS as library of modules. Table 2: Library of modules Module
35、 Class Module Id Description OIP_OIR OIP_OIR_TC_Functions OIP_OIR test case functions OIP_OIR_TestCases OIP_OIR test case definitions OIP_OIR_Templates OIP_OIR template definitions AtsCommon SS_Ims_PICS Module Parameter declarations associated with PICS SS_Ims_PIXITS SIP common Module Parameter decl
36、arations associated with PIXIT SS_Ims_TestConfiguration Functions which implement the configuration of the SUT adapter and mapping of test components for establishing and tearing down different test configurations SS_Ims_TestSystem TSI components, test system internal ports SS_Ims_TestCases Test cas
37、e definitions SS_Ims_Functions Test case functions LibIms LibIms_PIXITS IMS specific common Module Parameter (e.g. addresses related to SUT components and TS) declarations associated with PIXIT LibIms_Interface IMS component LibIms_SIPTypesAndValues IMS specific user and interface specific profile d
38、ata (see note) LibIms_Templates Modified templates with IMS specific header fields LibIms_Steps functions using IMS specific types ETSI ETSI TS 186 006-3 V3.1.1 (2012-01)9Module Class Module Id Description LibSip LibSip_PIXITS SIP general common Module Parameter (e.g. SDP/SIP procedure options) decl
39、arations associated with PIXIT LibSip_Interface SIP component LibSip_SIPTypesAndValues SIP message types and constants, simple user profiles (see note) LibSip_SDPTypes SDP types and constants LibSip_Templates Basic and modified templates with SIP specific header fields LibSip_Steps SIP specific beha
40、viour function library LibSip_XMLTypes XML types for SIP tests XSDAUX Basic types used in XML LibCommon LibCommon_AbstractData Generic data types for a stack and its operations LibCommon_BasicTypesAndValues Basic type and value definitions (integer and Boolean) LibCommon_DataStrings Bit and Octet st
41、ring types LibCommon_Sync Co-ordination/synchronization of test components LibCommon_TextStrings Basic character and string types with fixed length LibCommon_Time Time handling functions and module parameter LibCommon_VerdictControl Basic functions for setting of test component verdicts NOTE: In ord
42、er to build a comprehensive library all SIP message header (incl. IMS specific) have been defined in LibSip_SIPTypesAndValues only. 5.3.2 Use of TTCN-3 For the purposes of the present document, the description of the use of TTCN-3 described in clause 5.3.2 of TS 102 790-3 3 applies. ETSI ETSI TS 186
43、 006-3 V3.1.1 (2012-01)10Annex A (normative): Partial PIXIT proforma Notwithstanding the provisions of the copyright clause related to the text of the present document, grants that users of the present document may freely reproduce the PIXIT proforma in this annex so that it can be used for its inte
44、nded purposes and may further publish the completed PIXIT proforma. A.1 Introduction This partial PIXIT proforma contained in the present document is provided for completion, when the related Abstract Test Suite is to be used against the Implementation Under Test (IUT). The completed partial PIXIT w
45、ill normally be used in conjunction with the completed PICS, as it adds precision to the information provided by the PICS. A.2 PIXIT items According to the type of ATS defined in the present document, the PIXIT are divided in PIXIT items for UE, AS and S-CSCF testing and general PIXIT items that app
46、ly for all types of IUT. Each PIXIT item corresponds to a Module Parameter of the ATS. NOTE: The PIXIT definitions are part of a SIP TTCN-3 library that contains additional PIXIT definitions that are not used in this ATS and are therefore not presented in the following tables. A.2.1 PIXIT for UE Tes
47、ting Table A.1: PIXIT items for UE testing Id Identifier Type / Description 1 PX_IMS_TS_PCSCF_IPADDR charstring, for TS/P-CSCF IP address to exchange SIP messages. 2 PX_IMS_TS_PCSCF_PORT integer, for IUT/P-CSCF port number to exchange SIP messages. 3 PX_IMS_TS_UE1_IPADDR charstring, for IP address u
48、sed by the UE1 to exchange SIP messages. 4 PX_IMS_TS_UE1_PORT integer, for port number used by the UE1 to exchange SIP messages. 5 PX_IMS_SUT_UE1_BEARER_IPADDR charstring, for IP address used by the TS to exchange media streams for UE1. 6 PX_IMS_SUT_UE1_HOME_DOMAIN charstring, for identity of the te
49、ster UE1 local domain. 7 PX_IMS_SUT_UE1_PUBLIC_USER charstring, for identity of the tester UE1 local user. 8 PX_IMS_SUT_UE1_PRIVAT_USERNAME charstring, for RFC 2617 10, clause 3.2.2 username of UE1: The name of user in the specified realm. 9 PX_IMS_SUT_UE1_PRIVAT_PASSWD charstring, for RFC 2617 10, clause 3.2.2.2 passwd of UE1: A known shared secret, the password of user of the specified username. 10 PX_IMS_SUT_UE1_QOP charstring, for RFC 2617 10, clause 3.2.1 qop options of UE1: Quoted string of one or more tokens
