1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 10 13 N-STATUS Replaced by WSS-M13P12-A L. Schmalz, FNA 2004 02 20 Revised Para 3.0 inserted; para 3.8, 3.9, 3.10, 4 deleted (Was XP-M1CX4-A, Replaces ESP-M1C204-A) Printed copies are uncontrolled Copyright 2008, Ford Global Technologies,
2、 LLC Page 1 of 1 GREASE, SYNTHETIC - POLYESTER BASE - ESP-M1C204-B INORGANIC THICKENER NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a synthetic polyester based grease with an inorganic thickener. 2. APPLICATION This specification was released originally for gr
3、ease used to lubricate electrical contacts in automatic transmission neutral start switches. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 COLOR Greyish white 3.2 INORGANIC THICKENER (CLAY) 10.0 - 11.0 % (ASTM D 128) 3.3 DROPPING POINT, min 175 C (ASTM D 566) 3.4 PENETRATION 320 - 350 (ASTM D 217, 60 strokes) 3.5 FLASH POINT, min 220 C (ASTM D 93) 3.6 FIRE POINT, min 260 C (ASTM D 92) 3.7 CORROSION No corrosion (FLTM BJ 113-02, 500 h)
