1、 NON-PRODUCTION MATERIAL SPECIFICATION Material Name Specification Number Date Action Changes 2009 04 09 N-STATUS No Replacement Named L. Sinclair, FNA 1991 12 01 Page 1 of 1 IMPACT TOOL GREASE M1C22-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE: The material desired by this standard is a water resistant
2、 aluminum soap grease. 2. APPLICATION: This material is generally used to lubricate impact type air tools. 3. REQUIREMENTS: 3.1 PENETRATION: (Worked) (ASTM D 217) 320-350 3.2 DROPPING POINT: (ASTM D 566) 93.3 C min 3.3 ALUMINUM SOAP: 12.0% max (FLTM AJ 106-2, modified) 3.4 ASH: (ASTM D 128) 1.0% max 3.5 MOISTURE CONTENT: (ASTM D 95) None 3.6 VISCOSITY: Of Base Oil (ASTM D 445) Centistokes at 37.8C 432.8 min 4. STANDARD PARAGRAPHS: The following standard paragraphs as defined in Manufacturing Standard MCX, are herewith made a part of this standard: C1, P1, P2, P3, R1, R2.
