1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 02 08 Revised Inserted 3.0; Deleted 3.1, 3.2, 3.3, 3.9, 4 1992 09 30 Released NEO1-E-10127076-070 E. Duda Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 1 of 1 TAPE, ALUMINUM FOIL, HIGH TEMPERATURE, WSE
2、M3G211-A PRESSURE SENSITIVE 1. SCOPE The material defined by this specification is a dead soft aluminum foil combined with a pressure sensitive silicone adhesive. 2. APPLICATION This specification was released originally for material used as a heat reflective wrap along EGR tubes where conformabili
3、ty, strength and high heat resistance are needed. Performance range is from -60 to +300 C. Prior to its release for a particular application and in addition to the requirements specified within this specification, this material must undergo a full component evaluation, conducted by the responsible C
4、omponent Engineering activity, using the substrates used in the intended application. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 THICKNESS,
5、range 0.077 - 0.103 mm (ASTM D 1000) 3.5 ADHESION TO STEEL, mm (ASTM D 1000) 3.5.1 Original 300 N/m 3.5.2 Aged 168 h at 175 C 300 N/m 3.6 BREAKING STRENGTH, mm 3.5 N/mm (ASTM D 1000) 3.7 UNWIND FORCE, range 200 to 400 N/m (ASTM D 1000, Method “B“, slow rate of removal) 3.8 STORAGE STABILITY 6 months (From date of receipt at Ford Motor Company)
