1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Ver 2 2014 06 19 N Status No replacement named M. Montgomery, EU 2008 08 19 Activated M. Montgomery, FOE Copyright 2014, Ford Global Technologies, LLC Page 1 of 2 FABRIC, VELVET PATTERN, JACQUARD, UNLAMINATED WSS-M1H1060-A NOT TO BE USED FOR
2、NEW DESIGN 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the Galaxy CD340 MCA. 3. REQUIREMENTS In addition to the requirements listed her
3、ein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fab
4、ric Count, +/-10% tolerance (ASTM D 3775) Warp 330 ends/10 cm Weft 140 picks/10 cm 3.2.2 Fabric Weight, +/-10% tolerance (FLTM BN 106-01) 350 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 620dtex, f 102 (AirJet Texturised) Weft 540dtex, f 128 (AirJe
5、t Texturised) Effect 13.4 Nm TRISTANFlo 3.5 Nm Flock yarn ENGINEERING MATERIAL SPECIFICATION WSS-M1H1060-A Copyright 2014, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Package Dyed (warp & weft yarn/components) 3.6 FINISHED OPERATIONS Antistatic treatment/ Washing/thermo fixation 4
6、 GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
