1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2005 02 10 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 1 of 2 FABRIC, LUMEN, WOVEN JACQUARD, WSS-M1H974-A UNLAMINATED 1. SCOPE The material defined by this specification is a woven
2、 jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for the 2006 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicabl
3、e. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 360 ends/10 cm Weft 140 picks/10
4、cm 3.2.2 Fabric Weight, range. (FLTM BN 106-01) 265 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 370 dtex f68 (false twist, round, semi-dull) Weft 520 dtex f96, (round air texturized, semi-dull) 700 dtex f192 (trilobal air texturized, bright) ENGINE
5、ERING MATERIAL SPECIFICATIONWSS-M1H974-A Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.6 FINISHING OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
