1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 12 16 N-STATUS Replaced by WSS-M1H1099-A V. Demarchi, FSAO 2005 02 23 Activated L. Neves Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, PATHERNON PATTERN, WOVEN JACQUARD, UNLAMINATED WSS-
2、M1H994-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2006 Model Year. 3. REQUIREMENTS In addition to the require
3、ments listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTR
4、UCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 280 yarn/10 cm Weft 180 yarn/10 cm 3.2.2 Fabric Weight, range 254 310.0 g/m (FLTM BN 106-01) 3.2.3 Thickness, range 0.8 1.0 mm 3.2.4 Thickness, trilaminated, range 2.0 mm 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester ENGINEERING MAT
5、ERIAL SPECIFICATIONWSS-M1H994-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 167 dtex f48 x 3, Semi Dull, Air Textured Polyester Weft 167 dtex f48 x 2, Semi Dull, False Twisted Polyester 3.5 METHOD OF DYEING Warp S
6、olution Dyed Weft Yarn Dyed 3.6 FINISHING OPERATIONS Heat Set 3.7 STRETCH AND SET, TRILAMINATED 3.7.1 Stretch, range Warp 2 5% Fill 2 5% 3.7.2 Set, max. Warp 5% Fill 5% 3.8 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded com
7、posite. 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
