FORD WSS-M28P1-B1-2015 GLASS PERFORMANCE SAFETY FLOAT LAMINATED FOR WINDSHIELDS TO BE USED WITH FORD WSS-M99P1111-A .pdf

上传人:jobexamine331 文档编号:752612 上传时间:2019-01-14 格式:PDF 页数:24 大小:212.72KB
下载 相关 举报
FORD WSS-M28P1-B1-2015 GLASS PERFORMANCE SAFETY FLOAT LAMINATED FOR WINDSHIELDS  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第1页
第1页 / 共24页
FORD WSS-M28P1-B1-2015 GLASS PERFORMANCE SAFETY FLOAT LAMINATED FOR WINDSHIELDS  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第2页
第2页 / 共24页
FORD WSS-M28P1-B1-2015 GLASS PERFORMANCE SAFETY FLOAT LAMINATED FOR WINDSHIELDS  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第3页
第3页 / 共24页
FORD WSS-M28P1-B1-2015 GLASS PERFORMANCE SAFETY FLOAT LAMINATED FOR WINDSHIELDS  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第4页
第4页 / 共24页
FORD WSS-M28P1-B1-2015 GLASS PERFORMANCE SAFETY FLOAT LAMINATED FOR WINDSHIELDS  TO BE USED WITH FORD WSS-M99P1111-A  .pdf_第5页
第5页 / 共24页
点击查看更多>>
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 06 2015 06 29 Revised See Summary of Revisions for Details J. Crist, NA 2015 03 02 Revised See Summary of Revisions for Details J. Crist, NA 1996 11 04 Activated B1 B5: 1996 11 04. B6 and B7: 2008 02 07 W. Curtiss/W. Scholz Controlled do

2、cument at www.MATS Copyright 2015, Ford Global Technologies, LLC Page 1 of 24 GLASS, PERFORMANCE, SAFETY, FLOAT LAMINATED WSS-M28P1-B1 FOR WINDSHIELDS LAMINATED FOR SIDE GLASS AND BACKLITES WSS-M28P1-B2 LAMINATED FOR ALL OTHER GLASS APPLICATIONS WSS-M28P1-B3 TEMPERED FOR SIDE GLASS AND BACKLITES WSS

3、-M28P1-B4 TEMPERED FOR ALL OTHER GLASS APPLICATIONS WSS-M28P1-B5 POLYCARBONATE (PC) COATED, FOR SIDE GLAZING AND BACKLITES WSS-M28P1-B6 POLYCARBONATE (PC) COATED, FOR ALL OTHER GLAZING APPLICATIONS WSS-M28P1-B7 1. SCOPE The following specifications define performance requirements for: B1 - Laminated

4、 products for windshields. B2 - Laminated products used in areas such as side glass and backlites. B3 - Laminated products used anywhere driver visibility is not a concern such as roof glazing or behind the B pillar on trucks. B4 - Tempered products used in areas such as side glass and backlites. B5

5、 - Tempered products used anywhere driver visibility is not a concern such as roof glazing or behind the B pillar on trucks. B6 - Polycarbonate (PC) coated products used in areas such as fixed side glazing and fixed backlites. B7 - Polycarbonate (PC) coated products used anywhere driver visibility i

6、s not a concern such as fixed roof glazing or behind the B pillar on trucks. 2. APPLICATION These specifications were released originally for processed safety glazing that meet all Governmental and other standards (reference para 3.8) used for glazing motor vehicles. 3. REQUIREMENTS 3.0 STANDARD REQ

7、UIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). All test plaques must go through process conditions identical to that of final production parts. ENGINEERING MATERIAL SPECIFICATION W

8、SS-M28P1-B1/B7 Copyright 2015, Ford Global Technologies, LLC Page 2 of 24 3.4 APPEARANCE Automotive windows are defined as “appearance items“ according to AIAG (Automotive Institute Action Group) Production Part Approval Process (PPAP). This requires that adequate approval of appearance criteria mus

9、t be defined and adhered to. Since this specification is the sole definition of such criteria, adherence to it satisfies the intent of PPAP Appearance Item Requirements, therefore, no additional appearance approval reporting is required. 3.5 TRADEMARK The trademark shall meet all criteria of the Ame

10、rican National Standard Institute (ANSI) for conformance to North American requirements or shall meet all the criteria for the local or intended market requirements. Mandatory information required in the Trademark: the American Standard number (AS no.), Manufacturers DOT Identification, Date Code (m

11、onth year), Material Construction Identification (M number), and Manufacturing Plant Identification. Manufacturers Logo (opt) and Material Description (opt). Examples are shown in para 4.1. The trademark shall also include any additional information required by the country of intended use. The trade

12、mark shall be legible from inside or outside the vehicle. Location of the trademark shall be designated and/or approved by all responsible activities of the Ford Motor Company. The trademark location shall be shown on the engineering drawing. The trademark may be applied using ceramic coatings in gl

13、ass or via a printing, laser part marking tool marking, film lamination, or film insert molding (FIM) procedure in polycarbonate. In the case of polycarbonate glazing the method or methods allowable shall be specified on the engineering document. 3.6 GLAZING CONSTRUCTION The glazing material constru

14、ction, including color, thickness, gradient band, coating, grid lines, obscuration pattern (such as on moon roofs), and tolerances to these items shall be as specified on the engineering drawing. 3.7 VISIBILITY DISTORTION The finished part needs to be visually inspected per the RQT-011101-012053 Opt

15、ical Distortion Test. This inspection is to be included in the manufacturers control plan as agreed upon by both Materials Engineering and Design Engineering. Boundary samples signed off by PVT, STA and PD Engineering will be used to establish the threshold of an acceptable part. . 3.8 GOVERNMENTAL

16、REQUIREMENTS The glass must meet the applicable Regional Standards and Regulations; for North America FMVSS 205, for Europe ECE and for China GB656 or as specified by Engineering Drawing. 3.9 EDGE FINISH (SAE J673) The edge requirements of finished parts shall be as specified on the engineering draw

17、ing. Typically edge finish numbers 1, 2, 3, 4 or 5 are used for automotive glazing applications. ENGINEERING MATERIAL SPECIFICATION WSS-M28P1-B1/B7 Copyright 2015, Ford Global Technologies, LLC Page 3 of 24 3.10 TOTAL GLAZING THICKNESS Nominal glazing thickness of finished parts, including the toler

18、ance, must be as shown on the engineering drawing. 3.11 GRADING AREAS FOR DEFECT DETERMINATION These areas shall be specified on the engineering drawing. Refer to Figures 1, 2, 3, 4 and 5. The following grading areas have been identified to allow variation in appearance defect requirements: WINDSHIE

19、LDS, FRONT DOOR GLAZING, AND OTHER GLAZING AREA A Central area of the glazing out to area B (excluding mirror button foot print). AREA B Painted areas, including dot patterns, mirror button footprint and gradient band. AREA C Nonvisible area of the glazing covered or concealed by a module, molding o

20、r weatherstrip by adjacent componentry or system coverage as identified on engineering drawing. Area designation may be surface dependent. 3.12 INSPECTION METHOD for determining appearance flaws The glazing shall be examined in true view position under diffuse lighting conditions with 270 +/- 50 lux

21、 illumination measured facing the center of the white grid board at a distance of 20 +/- 2.5 cm. The part shall be examined by looking through the part with it positioned 50 - 90 cm from the observer (arms length). The observers eye shall be level with the center and perpendicular to the part (see F

22、igure 6). An appearance item will be considered a flaw only if it is detected within 6 seconds (for body glass) and within 15 sec (for windshields and backlites) without being highlighted. If an appearance flaw is observed, the applicable specification requirements must be referenced to determine if

23、 the flaw is acceptable. Edge quality of the part may be evaluated by viewing the perimeter of the part under the same inspection conditions. ENGINEERING MATERIAL SPECIFICATION WSS-M28P1-B1/B7 Copyright 2015, Ford Global Technologies, LLC Page 4 of 24 3.12.1 Manufacturing Defects and Glazing Quality

24、 The following is a list of permitted flaws. Any variations due to specific part requirements must be specified on the engineering drawing. All flaws in Area C are permitted, as long as they do not affect glass structural integrity or function. If flaws are detected, the following criteria will be u

25、sed to determine acceptance or rejection. Area A Area B Basic defects, including bubbles, seeds, stones, top tin, adhesion chips, and paint spots 1.0 mm maximum, including distortion for windshields. 0.5 x 1.0 mm (3 allowed); 1.0 mm dia.(6 allowed), no more than 6 total for backglass and quarter win

26、dows, 150 mm separation Bloom Not allowed* Bulls eyes Permitted if not visible at an angle up to 35 degrees from normal Dig/rub Not allowed* Etch mark, crush Not allowed* Localized distortion Visible distortion permitted within 10 mm of paint edge, otherwise it may require approval per para 3.8. Lin

27、t (laminated Heavy 0.5-5.0 mm and Medium 10.1-20.0 mm no more than 2 in a 305 mm dia.; Medium 3.0-10.0 mm and Light 20.1-40.0 mm no more than 3 in a 305 mm dia.; Light 6.0-20.0 no more than 4 in a 305 mm dia. Edge Treatment (Shiners, etc.) Refer to SAE J673 for glass edge definition. Specific edge r

28、equirements identified on part drawing. Tool marks, including mold marks, cloth marks, screen marks, and tong marks. Not allowed* Permitted if 0.75 mm diameter, none allowed; 0.4 mm diameter to 0.75 mm diameter, five allowed per part 250 mm apart; 0.4 mm diameter, an unlimited number are allowed but

29、 no more than two in a 25 square cm area Fingerprints A deposit left on the coated or uncoated surface by touching it with either a gloved or ungloved hand. No fingerprints permissible in finished part. Flow Interruption Visible mark near the gate of a part where the smooth flow of polycarbonate has

30、 been interrupted None allowed in Area A or B. Dot Runs (Coating drip marks) Coating runs caused by the dotted fade out pattern leaving a visible blemish on the parts surface Allowed as long as it does not cause any major distortion Picture Framing Coating defect of a build up of material at the jun

31、cture between the 2 shots of a multi-shot injection molded piece Unacceptable if visible on the transparent portion of the glazing piece. Coating Runs Visible streaks in the coating layer None allowed in the “A” area White Specks Point defect having a white appearance Permitted if 10.0 mm from edge

32、of glazing Haze Reduced transparency of the part, frequently seen as a whitening of the surface with no distinct edges to the whitened area. Affected area larger than 4 square mm. None allowed in viewing area of finished part. Surface roughness Roughness caused by the coating process None allowed in

33、 the visible surface area. Only allowed in the “C” area ENGINEERING MATERIAL SPECIFICATION WSS-M28P1-B1/B7 Copyright 2015, Ford Global Technologies, LLC Page 7 of 24 3.12.5.2 Polycarbonate Cutting and Handling Defects Defect Definition of Defect Acceptance Criteria Flake Chip Shell-like chips which

34、may flake off an edge, either on the periphery or at a drilled hole. 6.0 x 0.7 x 5.0 mm permitted if not visible in car position Area C only. On #1 edge, 1.5 mm dia. Maximum, 1 per 150 mm length. In Area C, chips are permitted on #2 along the edge closest to the “C“ region, a smear protruding 2 mm i

35、s allowed Incorrect Print Dots missing or run together The incomplete printing of the desired image on the surface of a part 1.0 x 6.0 mm allowed, 305 mm separation. Edge of print not consistent Printing edge has inconsistent smoothness and straightness Saw tooth 0.5 mm peak height permitted, 0.5 to

36、 1.0 permitted over 150 mm length per edge Grid Color Variations in color due to silver on different surfaces are acceptable. Busbar visibility through decoration layer Busbar ink may be visible from the exterior, provided part performance is unaffected. Discoloration from heater grid, antenna, bus

37、bar Discoloration of bus typically due to oxidation. 10.0 x 15.0 mm, may be visible on one or both sides of part (concurred by styling representative) Silver void on heater grid, antenna, or bus bar Allowable only if not visible from outside of vehicle and part performance is not affected. May be re

38、paired (touch ups) if void is less than 3 mm in diameter and part performance is not affected post touch up. ENGINEERING MATERIAL SPECIFICATION WSS-M28P1-B1/B7 Copyright 2015, Ford Global Technologies, LLC Page 9 of 24 3.12.5.4 Polycarbonate Decoration Defects (Laser, Tool obscuration, Film Insert M

39、olding or Lamination) Defect Definition of Defect Acceptance Criteria Coating defect over laser decoration Delamination or cracking of coating with genesis from the edge of the laser part mark. This may occur when laser part marking occurs after coating procedure and the laser power is too high. No

40、damage to coating system within 0.1 mm of edge of laser part mark. Coating defect over tool marking Coating drips, runs, and or build up due coating over laser part marking No drips, build up, or run visible in area “A” or “B”. Defects in the “C” area are allowed, so long as they do not result in cr

41、acking or delamination of coating. Wrinkling of Film Film folds or wrinkles during the manufacturing process, resulting in wrinkled lines in the in the glazing piece. Not allowed in “A” and “B” areas Film Delamination Film delaminates from PC substrate or coating delaminates from film Not allowed in

42、 any area. Air, oil, or moisture Penetration (bubbles) Air, oil, or water pockets trapped underneath film. None allowed in areas “A” and “B”. For area “C” 1.5mm diameter allowed. Dirt/foreign Material Dirt or foreign material stuck between the film and the PC. Area “A“: 1.0 mm, 305 mm separation Are

43、a B: 1.5 mm, 305 mm separation. Area C: Not specified. 3.13 OBSCURATION AND PRINTING IN GLAZING 3.13.1 Glass Ceramic Coatings Decorative ceramic coatings shall be as specified on the engineering drawing. Materials supplied shall meet all the requirements listed in those specifications. Reference par

44、a 4.7. Conductive coatings, such as painted antennas and heated grids for backlites, must meet all requirements of Delta WSB-M12P2 or equivalent. EHBs (electrically heated backlites) must also conform to all SDS requirements and/or manufacturers ES requirements. ENGINEERING MATERIAL SPECIFICATION WS

45、S-M28P1-B1/B7 Copyright 2015, Ford Global Technologies, LLC Page 10 of 24 3.13.2 Polycarbonate Conductive INKS and PASTES the following are references for performance: Conductive pastes, such as printed antennas and heated grids for backlites, must meet all requirements of WSB-M12P2 or equivalent. E

46、HBs (electrically heated backlites) must also conform to all applicable SDS requirements. 3.13.3 Decorative Inks/Blackout Paints Decorative inks/paints shall be as specified on the engineering drawing. Materials supplied shall meet all the requirements listed below. 3.13.3.1 Opacity The measurement

47、shall be made using a transmission black and white densitometer e.g. “Tobias Model TBX” or similar, in direct contact with the coating surface. For items B1, B2, B3, B4, B5, B6 UV light transmission must be less than 0.1% (UV absorption must be greater than 99.9%). 3.13.3.2 Color (FLTM BI 109-01 Vis

48、ual Assessment, SAE J1545, Three-Angle CMC) Shall match the Master Approved Sample color panel or the initial sample as approved by Design Center. Decorative inks shall be as specified on the engineering drawing. Materials supplied shall meet all the requirements listed in those specifications. 3.13

49、.3.3 Ink/Paint Thickness (ASTM B 487, Non-Metallic Substrates, PELT or equivalent.) Coating thickness must be sufficient to meet all requirements of this material specification. Refer to mutually agreed upon control plan. 3.13.3.4 Ink/Paint Adhesion Ink Adhesion, max Grade 2 (FLTM BI 106-01, Method B carbide tip scribe only), part should be tested in the coating ink/paint configuration as specified on the engineering drawing. 3.13.3.5 Obscuration and decoration i

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1