1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2012 10 10 Released S. Ryzyi, NA Controlled document at www.MATS Copyright 2012, Ford Global Technologies, Inc. Page 1 of 2 SURFACTANT, LUBRICANT, RUBBER HOSE WSS-M99B144-B1 AND TUBING, LOW SOLIDS SURFACTANT, LUBRICANT, RUBBER HOSE WSS
2、-M99B144-B2 AND TUBING. HIGH SOLIDS 1. SCOPE The material defined by this specification is a long chain alcohol-ethylene oxide condensate surfactant and a polymer bound colorant. 2. APPLICATION This specification was released originally for a lubricant used as an assembly aid for rubber hose and tub
3、ing. It is purchased in diluted form. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). B1 B2 3.2 FORM Liquid Liquid 3.3 COLOR Purple or Purple or (Vis
4、ual) Colorless Colorless 3.4 SURFACE TENSION 27 mN/m max 27 mN/m max (ASTM D1331) 3.5 pH 6 8 6 8 (ASTM E70, Add 10 mL of lubricant to 40 mL of water.) 3.6 SPECIFIC GRAVITY 1.001 - 1.0035 0.985 - 1.015 (ASTM D1298 at 15 C) 3.8 ACTIVE INGREDIENT (Total Solids) 0.2 - 1% 18 - 22% (ASTM D460, Method A, b
5、y weight) ENGINEERING MATERIAL SPECIFICATION WSS-M99B144-B1/B2 Copyright 2012, Ford Global Technologies, Inc. Page 2 of 2 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. The surfactant is diluted with water by the manufacturer prior to shipment. Due to differences in the concentrate, the dilution ratio (water:surfactant) is as follows: B1 = 200:1 B2 = 40:1 5. SUMMARY OF REVISIONS