GOST 10596-1977 Skins of hare white and hare grey dressed Specifications《熟白和熟灰白兔皮 规范》.pdf

相关资源

GSFC-STD-7000 REV A-2013 GENERAL ENVIRONMENTAL VERIFICATION STANDARD (GEVS).pdf

GSFC-S-311-P-822 REV A-2008 Connectors PWB 2 mm cPCI Style High Reliability.pdf

GSFC-S-311-M-70 REV B-2009 SPECIFICATION FOR DESTRUCTIVE PHYSICAL ANALYSIS (DPA)《物理破坏性分析(DPA)规范》.pdf

GSFC NASA GPR 8830 1-2008 Facility Operations Managers [Cancelled GSFC NASA GMI 7234 2]《设备操作管理员[GSFC NASA GMI 7234 2作废]》.pdf

GSFC NASA GPR 7123 1-2008 Systems Engineering [Cancelled GSFC NASA GPR 7120 5 REV A GSFC NASA GPR 7120 5]《系统工程[GSFC NASA GPR 7120 5修订本A和GSFC NASA GPR 7120 5作废]》.pdf

GSFC NASA GPR 1860 1 REV B-2008 Ionizing Radiation Protection《电离性辐射保护》.pdf

GSFC NASA GPR 1800 1 REV B-2008 Goddard Space Flight Center (GSFC) Smoking Guidelines《戈达德宇航中心(GSFC)的吸烟指南》.pdf

GSA ZZ-I-550 F-1992 INNER TUBE PNEUMATIC TIRE《气轮胎内胎》.pdf

GSA W-C-1684-1977 CASSETTES MAGNETIC TAPE AUDIO RECORDING (TWIN-HUB COPLANAR)《音频记录盒式磁带(同面双中枢)》.pdf

GSA TT-W-572 B-1969 WOOD PRESERVATIVE WATER-REPELLENT《木料防腐剂 憎水剂》.pdf

猜你喜欢

STAS 8100 3-1988 LIMITS AND FITS SYSTEM FOR LINEAR DIMENSIONS General use tolerance classes for dimensions up to 3150 mm《线性尺寸的极限与配合系统 尺寸高达3150毫米的通用公差等级 》.pdf

STAS 8100 4-1988 LIMITS AND FITS SYSTEM FOR LINEAR DIMENSIONS General use tolerance classes selection for dimensions up to 500 mm《线性尺寸的极限与配合系统尺寸高达500毫米的通用公差等级选择 》.pdf

STAS 8100 5-1990 Limits and fits system for linear dimensions Fundamental limits fundamental fits and tolerance classes for dimensions over 3150 mm and up to 10000 mm《线性尺寸的极限与适合系统..pdf

STAS 8100 6-1990 Limits and fits shstem for linear dimensions Fundamental limits fundamental fits and tolerance classes for dimensions over 10000 mm and up to 40000 mm《线性尺寸的极限与适合系统.pdf

STAS 8102-1968 《ISO系统的公差和校准制 尺寸可达500mm的常用公差范围轴 》.pdf

STAS 8103-1968 《IOS系统公差和校准制 尺寸可达500mm的常用公差范围 内燃机气缸的内径》.pdf

STAS 8106-1968 《ISO系统公差和校准制 精准机械业用，尺寸可达18mm的公差范围轴》.pdf

STAS 8107-1968 《ISO系统的公差和校准制 尺寸可达18mm，用于精准机械工业的公差范围 内燃机气缸的内径 》.pdf

STAS 8109-1968 《ISO系统公差和校准制 尺寸从500至3150mm的公差范围的选定轴》.pdf