GOST 13790-1968 Tapered adapters 7 24 for end cutters with tapered shank Design and dimensions《带锥柄立铣刀用有7 24锥度异径套 结构及尺寸》.pdf

相关资源

GOST 13792-1968 Adapters with pulling-off nut for end cutters with tapered shank Design and dimensions《带锥柄立铣刀用带拧出螺母异径套 结构及尺寸》.pdf

GOST 13789-1968 Adapters for end cutters With tapered shank Design and dimensions《带锥柄立铣刀用异径套 结构及尺寸》.pdf

猜你喜欢

ASME B40 200-2008 Thermometers Direct Reading and Remote Reading《直接和远程读数温度计》.pdf

ASME B46 1-2002 Surface Texture Surface Roughness Waviness and Lay (B46 1 - 2002)《表面特征(表面粗糙度、波纹度和花纹方向)》.pdf

ASME B46 1-2009 Surface Texture (Surface Roughness Waviness and Lay)《表面纹理(表面粗糙度 波纹度和花纹方向)》.pdf

ASME B47 1 ERTA-2010 Gage Blanks《ASME B47 1-2007标准勘误 量规半成品》.pdf

ASME B47 1-2007 Gage Blanks《量规毛坯》.pdf

ASME B5 10-1994 Machine Tapers《机用锥度 自锁和大锥度系列》.pdf

ASME B5 11-1964 SPINDLE NOSES AND ADJUSTABLE ADAPTERS FOR MULTIPLE SPINDLE DRILLING HEADS《多轴钻床床头箱的轴头和可调接续器》.pdf

ASME B5 18-1972 Spindle Noses and Tool Shanks for Milling Machines《铣床的轴头和刀柄》.pdf

ASME B5 1M-1985 T-Slots Their Bolts Nuts and Tongues (Revision of ANSI B5 1-1975 Should Be Used Instead of ANSI B5 1 Which Was Cancelled in 1985)《T型槽及其螺栓 螺母和榫舌》.pdf