GOST R IEC 61249-2-5-2012 Materials for printed boards and other interconnecting structures Part 2-5 Reinforced base materials clad and unclad Brominated epoxide cellulose paper rees l.pdf

相关资源

GSFC-STD-7000 REV A-2013 GENERAL ENVIRONMENTAL VERIFICATION STANDARD (GEVS).pdf

GSFC-S-311-P-822 REV A-2008 Connectors PWB 2 mm cPCI Style High Reliability.pdf

GSFC-S-311-M-70 REV B-2009 SPECIFICATION FOR DESTRUCTIVE PHYSICAL ANALYSIS (DPA)《物理破坏性分析(DPA)规范》.pdf

GSFC NASA GPR 8830 1-2008 Facility Operations Managers [Cancelled GSFC NASA GMI 7234 2]《设备操作管理员[GSFC NASA GMI 7234 2作废]》.pdf

GSFC NASA GPR 7123 1-2008 Systems Engineering [Cancelled GSFC NASA GPR 7120 5 REV A GSFC NASA GPR 7120 5]《系统工程[GSFC NASA GPR 7120 5修订本A和GSFC NASA GPR 7120 5作废]》.pdf

GSFC NASA GPR 1860 1 REV B-2008 Ionizing Radiation Protection《电离性辐射保护》.pdf

GSFC NASA GPR 1800 1 REV B-2008 Goddard Space Flight Center (GSFC) Smoking Guidelines《戈达德宇航中心(GSFC)的吸烟指南》.pdf

GSA ZZ-I-550 F-1992 INNER TUBE PNEUMATIC TIRE《气轮胎内胎》.pdf

GSA W-C-1684-1977 CASSETTES MAGNETIC TAPE AUDIO RECORDING (TWIN-HUB COPLANAR)《音频记录盒式磁带(同面双中枢)》.pdf

GSA TT-W-572 B-1969 WOOD PRESERVATIVE WATER-REPELLENT《木料防腐剂 憎水剂》.pdf

猜你喜欢

GOST 26394-1984 Tools for cold upset automatic machines Hard alloy insert cutters for cutting off bolt blanks with shank length up to five diameters Construction and dimensions《自动冷.pdf

GOST 26395-1984 Tools for cold upset automatic machines Hard alloy in sert cutters for cutting off bolt blanks with shank length above five diameters Construction and dimensions《自动.pdf

GOST 26396-1984 Tools for cold upset automatic machines Dies for cutting off bolt blanks Construction and dimensions《自动冷镦机的工具 螺栓毛坯切断用阴模 结构及尺寸》.pdf

GOST 26397-1984 Tools for cold upset automatic machines Bolt heading dies Construction and dimensions《自动冷镦机的工具 镦制螺栓用阴模 结构及尺寸》.pdf

GOST 26398-1984 Tools for cold upset automatic machines Bolt heading dies with shank reducing Construction and dimensions《自动冷镦机的工具 螺栓镦制带缩经用阴模 结构及尺寸》.pdf

GOST 26399-1984 Tools for cold upset automatic machines Coning punches Construction and dimensions《自动冷镦机的工具 预镦冲头 结构及尺寸》.pdf

GOST 26400-1984 Tools for cold upset automatic machines Coning punches with injectors Construction and dimensions《自动冷镦机的工具 带顶出器的预镦冲头 结构及尺寸》.pdf

GOST 26401-1984 Tools for cold upset automatic machines Finishing punches Construction and dimensions《自动冷镦机的工具 精镦精头 结构及尺寸》.pdf

GOST 26402-1984 Tools for cold upset automatic machines Ejectors for bolt manufacturing tools Construction and dimensions《自动冷镦机的工具 制造螺栓用向工具送料器 结构及尺寸》.pdf