ICONTEC 1914-1984 《技术图纸，平面标示》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D4984-2006(2015) Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes《使用着色长度检测管对天然气中的二氧化碳的标准试验方法》.pdf

ASTM D4985-2005 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)《要求预.pdf

ASTM D4985-2009 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA).pdf

ASTM D4985-2010 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)《要求预.pdf

ASTM D4985-2010(2015) Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SC.pdf

ASTM D4986-2003 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials《泡沫聚合材料水平燃烧特性的标准试验方法》.pdf

ASTM D4986-2010 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials《多孔聚合材料的水平燃烧特性的标准试验方法》.pdf

ASTM D4986-2018 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials《多孔聚合材料的水平燃烧特性的标准试验方法》.pdf

ASTM D4987-1999(2003) Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper《一部分连续式纸张孔眼的拉伸断裂强度的标准试验方法》.pdf