IRAM 25576-1959 《基于硫酸脂肪醇与 或十二烷基苯的家用合成洗涤剂》.pdf

相关资源

JIS K3362-1998 合成洗涤剂的试验方法.pdf

JIS K3363-1990 合成洗涤剂生物降解度的试验方法.pdf

GB 3548-1983 合成洗涤剂工业污染物排放标准.pdf

GB 3548-1983 合成洗涤剂工业污染物排放标准.pdf

ASTM D3598-1989(2016) Standard Test Method for Citrate in Synthetic Detergents《合成洗涤剂中柠檬酸盐含量的标准试验方法》.pdf

GB T 18748-2002 表面活性剂和合成洗涤剂中活性组份分离的标准测定方法.pdf

ARMY P-D-410 C INT AMD 1-1983 DISHWASHING COMPOUND HAND (SYNTHETIC DETERGENT SOLID AND LIQUID FORM)《(固态和液态的合成洗涤剂)手洗组合》.pdf

ARMY P-D-410 C-1977 DISHWASHING COMPOUND HAND (SYNTHETIC DETERGENT SOLID AND LIQUID FORM)《(固态和液态的合成洗涤剂)手洗组合》.pdf

ASTM D820-1993(2003) Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents《含合成洗涤剂肥皂的化学分析标准试验方法》.pdf

ASTM D820-1993(2009) Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents《含合成洗涤剂肥皂的化学分析的标准试验方法》.pdf

猜你喜欢

CSN 25 4341-1961 Screw gauges Measuring parts for go side of thread plug gauges V-thread (angle between flanks 80 grads)《穿过型边螺纹规测量部件 两侧夹角为80的V行螺纹》.pdf

CSN 25 4342-1961 Screw gauges Measuring parts for not go side of thread plug gauges V-thread (angle between flanks=80 grads)《非穿过型边螺纹插塞的测量部件 两侧夹角为80的V型螺纹》.pdf

CSN 25 4345-1961 Screw gauges Limit thread rings go side V-thread (angle between flanks=80 grads)《穿过型边极限螺纹环 两侧夹角为80的螺纹》.pdf

CSN 25 4346-1961 Screw gauges Reference gauges for new thread rings with go side V-thread (angle between the flanks=80 grads)《穿过型边新螺纹环校准量规 V型螺纹（80牙侧角）》.pdf

CSN 25 4347-1961 Screw gauges Measuring parts of reference gauges for new thread rings with go side V-thread (angle between flanks=80 grads)《穿过型螺纹环校准规测量部件 两侧夹角为80的螺纹》.pdf

CSN 25 4348-1961 Screw gauges Reference gauges on wear for thread rings with go side V-thread (angle between flanks=80 grads)《穿过型边螺纹环耐磨校准量规 V型螺纹环（80牙侧角）》.pdf

CSN 25 4349-1961 Screw gauges Measuring parts of reference gauges on wear for thread rings with go side V-thread (angle between flanks=80 grads)《穿过型边螺纹环耐磨校准量规部件的测量 V型螺纹（80牙侧角）》.pdf

CSN 25 4350-1961 Screw gauges Limit thread rings not go side V-thread (angle between flanks=80 grads)《非穿过型端限制线圈翼角为80的V型线圈》.pdf

CSN 25 4354-1983 Gauges for edison screw《圆螺纹规》.pdf