IRAM OFICIALIZADA 104 N I O -1945 《由国家材料标准化委员会认证的金属布氏硬度的试验方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CEN TS 14632-2012 Plastics piping systems for drainage sewerage and water supply pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated poly.pdf

CEN TS 14689-2006 Leather - Physical and mechanical tests - Determination of bagginess creep and relaxation《皮革 物理和机械试验 膨胀 蠕变和松弛度测定》.pdf

CEN TS 14754-1-2007 Curing compounds - Test methods - Part 1 Determination of water retention efficiency of common curing compounds《养护剂的试验方法 第1部分 普通养护剂保水率的测定》.pdf

CEN TS 14758-2-2016 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 2 Guidance for the assessment o.pdf

CEN TS 14758-3-2006 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifier(s) (PP-MD) - Part 3 Guidance for installation《无.pdf

CEN TS 14773-2004 Postal services - Quality of service - Measurement of loss and substantial delay in priority and first class single piece mail using a survey of test letters《邮政服务.pdf

CEN TS 14807-2013 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried.pdf

CEN TS 14816-2008 Fixed firefighting systems - Water spray systems - Design installation and maintenance《固定消防系统 喷水系统 设计和安装》.pdf

CEN TS 14821-1-2003 Traffic and Travel Information (TTI) TTI messages via cellular networks Part 1 General specifications《交通和旅游信息(TTI) 通过蜂窝网络的TTI文电 第1部分 通用规范》.pdf