IS 13797-1993 Molybdenum disulphide dispersion in oil Specification.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSD-M2D376-A-2015 ETHYLENE PROPYLENE RUBBER (EPDM) ENGINE COOLANT AND COMPRESSION STRESS RELAXATION RESISTANT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSD-M2D378-A1-2004 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 60 DUROMETER A HARDNESS TO BE USED WITH FORD WSS.pdf

FORD WSD-M2D378-A1-2017 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 60 DUROMETER A HARDNESS TO BE USED WITH FORD WSS.pdf

FORD WSD-M2D378-A2-2001 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 60 DUROMETER A HARDNESS INTERIOR《汽车内部用硬度为60 A的中等耐高温耐候型三元乙丙橡胶(EPDM)橡胶改性.pdf

FORD WSD-M2D378-A4-2004 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 48 DUROMETER A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用硬度.pdf

FORD WSD-M2D378-A6-2004 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED 66 DUROMETER A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《硬度66 A的三元乙丙橡胶(EPDM)橡胶改性热塑性弹性体聚烯.pdf

FORD WSD-M2D378-A6-2016 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED 66 DUROMETER A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSD-M2D378-A7-2004 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED 87 DUROMETER A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A 《热塑性弹性体(TEO)聚烯烃 三元乙丙橡胶改性 87A硬度计硬.pdf

FORD WSD-M2D378-A7-2016 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN EPDM RUBBER MODIFIED 87 DUROMETER A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A .pdf