1、ITU-T RECMN*T.414 93 W 4862593 0593842 07T U INTERNATIONAL TELECOMMUNICATION UNION ITU-T TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU TELEMATIC SERVICES TERMINAL EQUIPMENTS AND PROTOCOLS FOR TELEMATIC SERVICES T.414 (03/93) INFORMATION TECHNOLOGY - OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE
2、 FORMAT: DOCUMENT PROFILE ITU-T Recommendation T.414 (Previously “CCIT Recommendation”) ITU-T RECMN*T.414 93 4862573 0593843 Tob FOREWORD IT (International Telecommunication Union) is the United Nations Specialized Agency in the field of telecommunications. The ITU Telecommunication Standardization
3、Sector (ITU-T) is a permanent organ of the ITU. Some 179 member countries, 84 telecom operating entities, 145 scientific and industrial organizations and 38 international organizations participate in ITU-T which is the body which sets world telecommunications standards (Recommendations). The approva
4、l of Recommendations by the Members of ITU-T is covered by the procedure laid down in WTSC Resolution No. 1 (Helsinki, 1993). In addition, the World Telecommunication Standardization Conference (WTSC), which meets every four years, approves Recommendations submitted to it and establishes the study p
5、rogramme for the following period. In some areas of information technology which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with IS0 and IEC. The text of ITU-T Recommendation T.414 was approved by the WTSC (Helsinki,March 1-12, 1993). The identical text
6、 is also published as ISO/IEC International Standard 8613-4. NOTES 1 As a consequence of a reform process within the International Telecommunication Union (ITU), the CCITT ceased to exist as of 28 February 1993. In its place, the ITU Telecommunication Standardization Sector (ITU-T) was created as of
7、 1 March 1993. Similarly, in this reform process, the CCIR and the IFRB have been replaced by the Radiocommunication Sector. In order not to delay publication of this Recommendation, no change has been made in the text to references containing the acronyms “CCITT, CCIR or IFRl3” or their associated
8、entities such as Plenary Assembly, Secretariat, etc. Future editions of this Recommendation will contain the proper terminology related to the new ITU structure. 2 telecommunication administration and a recognized operating agency. In this Recommendation, the expression “Administration” is used for
9、conciseness to indicate both a O ITU 1994 Ail rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU. ITU-T RECMN*T=4L4 93 48h2.591 0593844 742
10、CONTENTS INTRODUCTION . Scope Normative references . 2.1 Identical Recommendations I International Standards 2.2 2.3 Additional references Definitions Abbreviations . Conventions Purpose of the document profile Content of the document profile . 7.1 Values of document profile attributes . 7.2 Presenc
11、e of document constituents . 7.2.1 Generic layout structure 7.2.2 Specific layout structure 7.2.3 Generic logical structure . 7.2.4 Specific logical structure . 7.2.6 Presentation styles . 7.2.7 Sealed profiles . 7.2.9 Pre-enciphered body parts . 7.2.10 Post-enciphered body parts . 7.2.1 1 External-
12、document class . 7.2.12 Resource-document . 7.2.1 3 Resources 7.3 Document characteristics 7.3.1 Document application profile 7.3.2 Document application profile defaults 7.3.3 Document architecture class . 7.3.4 Content architecture classes 7.3.5 Interchange format class . 7.3.6 ODA version . 7.3.7
13、Alternative features sets 7.3.8 Non-basic document characteristics 7.3.9 Non-basic structure characteristics . 7.3.1 O Additional document characteristics . 7.4 Document management attributes 7.4.1 Document description . 7.4.2 Dates and times . 7.4.3 Originators 7.4.4 Other user information 7.4.5 Ex
14、ternal references 7.4.6 Local file references 7.4.7 Content attributes 7.4.8 Security information . Paired Recommendations I International Standards equivalent in technical content 7.2.5 Layout styles . 7.2.8 Enciphered profiles . ITU-T Rec . T.414 (1993 E) Page iv 1 1 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3
15、4 4 4 4 4 4 4 4 4 4 5 5 5 6 6 6 6 9 9 14 14 15 16 16 17 17 18 18 i ITU-T RECflN*T.YLY 93 4862593 05938Y5 889 U 7.5 Security attributes . 7.5.1 Sealed information encoding 7.5.2 ODA security label . 7.5.3 Sealed document profiles 7.5.4 Re-sealed document body parts . 7.5.5 Post-sealed document body p
16、arts 7.5.6 Enciphered document profiles 7.5.7 Re-enciphered document body parts 7.5.8 Post-enciphered document body parts Annex A - Format of personal names . Annex B - Minimum set of document profile attributes to be supportedby document application profiles . Annex C - Example . Index Page 18 19 1
17、9 19 20 21 22 22 22 24 25 27 29 ITU-T Rec . T.414 (1993 E) ITU-T RECNN*T=414 73 4862573 0573846 715 U INTRODUCTION This ITU-T Recommendation I International Standard was prepared as a joint publication by TSS Study Group 8 and ISOfiEC Joint Technical Committee 1. At present, the CCITT Recommendation
18、s in the T.410 - Series I International Standard IS0 8613 consists of: - Introduction and general principles; - Document structures; - Document profile; - Open document interchange formats; - Character content architectures; - Raster graphics content architectures: - Geometric graphics content archi
19、tectures; - Formal specification of the Open Document Architecture (FODA). (The formal specification is applicable to ISO/IEC 8613 only). Further Recommendations I International Standards may be added to this series of ITU-T Recommendations I International Standard. Development of this series of ITU
20、-T Recommendations I International Standard was originally in parallel with ECMA-1 O1 standard: Open Document Architecture. This series of ITU-T Recommendations I International Standard is a new edition of the CCITT T.410 - Series Recommendations (1 988) and IS0 861 3 (1989). Significant technical c
21、hanges are the inclusion of the following amendments as agreed by ITU-T and ISOAEC: - Alternative representation. - - Colour. - Conformance Testing annex. - - Security. - Streams. - Styles. - Tiled raster graphics. Annex on use of MHSMOTIS. Document Application Profile, Proforma and Notation. In add
22、ition, a number of technical corrigenda have been applied to this series of ITU-T Recommendations I International Standard. This ITU-T Recommendation I International Standard contains three annexes: - - Annex A (integral) specifies the format of personal names used in various document profile attrib
23、utes; Annex B (integral) specifies a minimum set of document profile attributes that is to be supported by document application profiles; Annex C (non-integral) contains an example of a document profile. - ITU-T Rec. T.414 (1993 E) iii ITU-T RECMNmT.414 93 48625911 0593847b51 ISO/IEC 8613-4 : 1994 (
24、E) INTERNATIONAL STANDARD ITU-T RECOMMENDATION INFORMATION TECHNOLOGY - OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT: DOCUMENT PROFILE 1 Scope The purpose of ITU-T Rec. T.410 - Series I ISOAEC 8613 is to facilitate the interchange of documents. In the context of this series of Recommendat
25、ions I International Standard, documents are to be items such as memoranda, letters, invoices, forms and reports, which may include pictures and tabular material. The content elements used within the documents may include graphic characters, raster graphics elements and geometric graphics elements,
26、all potentially within one document. NOTE - This series of Recommendations i International Standard is designed to allow for extensions, including hypermedia features, spreadsheets and additional types of content such as audio and video. In addition to the content types defined in this series of Rec
27、ommendations I International Standard, ODA also provides for arbitrary content types to be included in documents. This series of Recommendations I International Standard applies to the interchange of documents by means of data communications or the exchange of storage media. This series of Recommend
28、ations I International Standard provides for the interchange of documents for either or both of the following purposes: - - to allow presentation as intended by the originator; to allow processing, such as editing and reformatting. The composition of a document in interchange can take several forms:
29、 formatted form, allowing presentation of the document; processable form, allowing processing of the document; formatted processable form, allowing both presentation and processing of the document. - - - This series of Recommendations I International Standard also provides for the interchange of ODA
30、 information structures used for the processing of interchanged documents. This ITU-T Recommendation I International Standard: - - defines the purpose of the document profile; specifies the attributes which constitute the document profile. 2 Normative references The following Recommendations and Int
31、ernational Standards contain provisions which, through reference in this text, constitute provisions of this Recommendation I International Standard. At the time of publication, the editions indicated were valid. All Recommendations and International Standards are subject to revision, and parties to
32、 agreements based on this Recommendation I International Standard are encouraged to investigate the possibility of applying the most recent editions of the Recommendations and Standards listed below. Members of IEC and IS0 maintain registers of currently valid International Standards. The ITU-T Secr
33、etariat maintains a list of currently valid ITU-T/CCIT Recommendations. ITU-T Rec. T.414 (1993 E) 1 ITU-T RECMN*T.414 93 D 4862593 0593848 598 U ISO/IEC 8613-4 : 1994 (E) Identical Recommendations I International Standards - ITU-T Recommendation T.411 (1993) I ISO/IEC 8613-1 :1994, Information techn
34、ology - Open Document Architecture (ODA) and Interchange Format: Introduction and general principles. ITU-T Recommendation T.412 (1993) I ISO/IEC 8613-2:1994, Information technology - Open Document Architecture (ODA) and Interchange Format: Document structures. ITU-T Recommendation T.415 (1993) I IS
35、O/IEC 8613-5:1994, Information rechnology - Open Document Architecture (ODA) and Interchange Format: Open Document Interchange Format. ITU-T Recommendation T.416 (1993) I ISO/IEC 8613-6:1994, information technology - Open Document Architecture (ODA) and Interchange Format: Character content architec
36、tures. -T Recommendation T.417 (1993) I ISO/IEC 8613-7:1994, Information technology - Open Document Architecture (ODA) and Interchange Format: Raster graphics content architectures. ITU-T Recommendation T.418 (1993) I ISO/IEC 8613-8:1994, Information technology - Open Document Architecture (ODA) and
37、 Interchange Format: Geometric graphics content architectures. - - - - - 2.2 Paired Recommendations i International Standards equivalent in technical content - CCIIT X.400 - Series Recommendations (1988), Message Handling System. ISO/IEC 10021: 1989, Information technology - Text Communication - Mes
38、sage - Oriented Text Interchange Systems (MOTIS). Additional references - - ISO/IEC 646: 1991, Information technology - IS0 7-bit coded character set for information interchange. IS0 2022:1986, Information processing - IS0 7-bit and - - “transparency”; - “colour”; - “colour of layout object”; - “obj
39、ect colour table”; - “content background colour”; - “content foreground colour”; “dimensions”, only in the case that this attribute applies to a component of object type page; - “content colour table”; - “border”; - “layout path”; - “page position”; - “medium type”; - “block alignment”; - “type of c
40、oding”. Specifications of the presentation attributes and coding attributes for which a document application profile may define non-standard default values are given in other specifications of the ITU-T Rec. T.410 - Series I ISO/iEC 8613. These include ITU-T Rec. T.416, T.417, T.418 I ISO/IEC 8613-6
41、,8613-7.8613-8. The value of this attribute is a list of default values for any of the defaultable attributes (document architecture attributes as well as content architecture attributes) for which the document application profile defines a default value different from the default value defined in I
42、TU-T Rec. T.410 - Series I ISO/IEC 8613. If the value of the document profile attribute “document application profile” is an integer and no value is specified for the document application profile default attribute “content architecture class”, the latter is assumed to have the value formatted raster
43、 content architecture class as defined in ITU-T Rec. T.417 I ISO/IEC 8613-7. NOTE -This special default value is provided for compatibility with ITU-T Recommendations. A document application profile may define more than one default value for a defaultable attribute. In this case, and when the defaul
44、t value is to differ from the default value defined in ITU-T Rec. T.410 - Series I ISO/IEC 8613, then the value of this attribute shall specify the default value which applies to the particular document. 7.3.3 Document architecture class This attribute specifies the document architecture class used
45、in the document. This attribute shall always be specified. The value of this attribute is formatted, processable or formatted processable, representing one of the document architecture classes defined in ITU-T Rec. T.412 I ISOAEC 8613-2. 7.3.4 Content architecture classes This attribute specifies th
46、e content architecture classes used in the document. This attribute shall always be specified. The value of this attribute consists of zero or more ASN.1 object identifiers referring to content architecture classes defined in ITU-T Rec. T.410 - Series I ISOAEC 8613 or in other standards. ITU-T Rec.
47、T.414 (1993 E) 5 ITU-T RECMNUTm4L4 93 4862591 0593852 TL9 U ISOAEC 8613-4 : 1994 (E) Constraints on the permitted content architecture classes may be specified by the document application profile. The value of each object identifier shall designate a content architecture class defined in accordance
48、with the rules specified in -T Rec. T.412 I ISO/IEC 8613-2. If no document application profile is specified, this attribute shall only take values of identifiers of content architecture classes specified in IT-T Rec. T.410- Series I ISOAEC 8613 (see 7.3.1). 7.3.5 Interchange format class This attrib
49、ute specifies the interchange format class used to represent the document. This attribute shall always be specified. The value of this attribute is A or B, representing one of the interchange format classes defined in ITU-T Rec. T.415 I ISO/IEC 8613-5. NOTE - This attribute does not apply to the SDIF interchange format. 7.3.6 ODA version This attribute identifies the Document Architecture Standard or Recommendation version, and its publication date, to which the document conforms. This attribute shall always be specified. The value of this attribu
