JUS M L2 106-1992 Agricultural and forestry tractors - External noise - Method of measuring《农用和林场用轮式拖拉机 外部噪音 测量方法》.pdf

相关资源

JIS A1324-1995 建筑材料中水蒸发及渗透的测量方法.pdf

JIS A1325-1995 建筑材料的热膨胀系数的测量方法.pdf

JIS A1424-1-1998 给水设施噪声的实验室试验方法.第1部分 测量方法.pdf

JIS A1431-1994 空调和通风系统的风量测量方法.pdf

JIS B5031-2003 冲压模成套模具准确度和测量方法.pdf

ANSI IEC C78.60360-2002 电灯 灯头温度升高的标准测量方法.pdf

JIS A1416-2000 声学 建筑物元件的气载声音隔绝的实验室测量方法.pdf

JIS A1520-1988 门和窗的隔声现场测量方法.pdf

JIS A8403-5-1998 土方机械.液压挖掘机.第5部分 机械过加载的测量方法.pdf

JASO D002-1991 汽车无线电干扰特性测量方法.pdf

猜你喜欢

BS A 353-2000 Inserts with self-locking floating nut with MJ threads in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的MJ螺纹游动自锁螺母的衬套 尺寸》.pdf

BS A 354-2000 Inserts self-locking with MJ threads closed type in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的封闭式MJ螺纹的自锁衬套 尺寸》.pdf

BS A 355-2000 Inserts self-locking with MJ threads open type in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的开放式MJ螺纹自锁衬套 尺寸》.pdf

BS A 356-2000 Inserts self-locking with MJ threads reduced flanges closed type in metallic material coated or uncoated - Dimensions《覆层的或未覆层的金属材料制的封闭式小尺寸法兰缘MJ螺纹自锁衬套 尺寸》.pdf

BS A 357-2000 Inserts with clearance hole in metallic material coated or uncoated - Dimensions《金属材料制的涂覆或未涂覆的带间隙孔的衬套 尺寸》.pdf

BS A 358-1-2000 MJ threads - General requirements《MJ螺纹 一般要求》.pdf

BS A 358-2-2000 MJ threads - Limit dimensions for bolts and nuts《MJ螺纹 螺栓和螺母的极限尺寸》.pdf

BS A 358-3-2000 MJ threads - Limit dimensions for fittings for fluid systems《MJ螺纹 流体系统用的接头的极限尺寸》.pdf

BS A 359-2000 Nuts barrel self-locking floating with MJ threads classifications - 900 MPa (at ambient temperature) 235 C 1100 MPa (at ambient temperature) 235 C 1250 MPa (at ambien.pdf