MS 899-1984 SPECIFICATION FOR DRIED PRAWNS《干明虾规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 25157-1982 Broaches with diameter 12 and 14 mm for slitting holes with involute profile and centring at outside diameter with modul 1 mm double driven Construction and dimensi.pdf

GOST 25158-1982 Broaches with diameter from 15 to 90 mm for slitting holes with involute profile and centring at outside diameter with modul from 1 to 2 5 mm Construction and dimen.pdf

GOST 25159-1982 Broaches with diameter frome 15 to 90 mm for slitting holes with involute profile and centring at outside diameter with modul frome 1 to 2 5 mm double driven Constr.pdf

GOST 25160-1982 Broaches with diameter frome 45 to 90 mm for slitting holes with involute profile and centring at outside diameter with modul frome 3 to 5 mm Construction and dimen.pdf

GOST 25161-1982 Broaches with diameter frome 70 to 90 mm for slitting holes with involute profile and centring at outside diameter with modul frome 3 5 to 5 mm Double driven Constr.pdf

GOST 25162-1982 Emulsified floor polish Test method for wetting capacity《地板保护剂 乳剂地板蜡润湿能力测定方法》.pdf

GOST 25163-1982 Surface-active substances Method of determining of free polyethylene glycol and an active substance in nonionic surface-active substances《表面活性剂 非离子型表面活性剂中活性物质和游离聚乙烯.pdf

GOST 25164-1996 Connections of instruments and devices with external hydraulic and gas lines Types basic parameters and dimensions Technical requirements《仪器与装置同外部液压和气体管线的连接 型式，基本参数.pdf

GOST 25165-1982 Connections of SSI instruments and devices with external pneumatic lines Types basic parameters and dimensions Technical requirements《仪器与装置同外部气压管线的连接 型式，基本参数和尺寸 技术要.pdf