MSZ 1207-1962 《重型电力螺丝刀》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E2472-2012e1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions《测定在低约束条件下抗稳定裂纹扩展性的标准试验方法》.pdf

ASTM E2473-2005 Standard Practice for the Occupational Environmental Health View of the Electronic Health Record《通过电子健康记录观察职业 环境健康情况的标准实施规程》.pdf

ASTM E2473-2005(2011) Standard Practice for the Occupational Environmental Health View of the Electronic Health Record《通过电子健康记录观察职业环境 健康情况的标准实施规程》.pdf

ASTM E2474-2006 Standard Practice for Pharmaceutical Process Design Utilizing Process Analytical Technology《利用过程分析技术进行制药过程设计的标准规程》.pdf

ASTM E2474-2014 Standard Practice for Pharmaceutical Process Design Utilizing Process Analytical Technology《使用过程分析技术进行制药工艺设计的标准实施规程》.pdf

ASTM E2475-2010 Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control《与药物制造和控制相关的工艺理解的标准指南》.pdf

ASTM E2475-2010(2016) Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control《与药物制造和控制相关的工艺理解的标准指南》.pdf

ASTM E2476-2009 Standard Guide for Risk Assessment and Risk Control as it Impacts the Design Development and Operation of PAT Processes for Pharmaceutical Manufacture《影响到PAT过程的设计、制.pdf

ASTM E2476-2016 Standard Guide for Risk Assessment and Risk Control as it Impacts the Design Development and Operation of PAT Processes for Pharmaceutical Manufacture《影响PAT过程的设计 制定.pdf