MSZ 1790-1957 《圆柱形钻头切割设备》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN 3136-1996 Aerospace series - Rivets solid universal head in corrosion resisting steel FE-PA92HT passivated inch based series German version EN 3136 1996《航空航天系列 耐蚀钢FE-PA92HT钝.pdf

DIN EN 3138-2001 Aerospace series - Rivets solid 100 countersunk normal head with dome in corrosion resisting steel FE-PA2601 passivated inch based series German version EN 3138 20.pdf

DIN EN 3139-2001 Aerospace series - Rivets solid 100 countersunk normal head in corrosion resisting steel FE-PA11 passivated inch based series German version EN 3139 2001《航空航天系列 耐腐.pdf

DIN EN 314-1-2005 Plywood - Bonding quality - Part 1 Test methods German version EN 314-1 2004《胶合板 粘合质量 第1部分 试验方法》.pdf

DIN EN 314-2-1993 Plywood bonding quality part 2 requirements German version EN 314-2 1993《胶合板 粘合质量 第2部分 要求》.pdf

DIN EN 3140-2001 Aerospace series - Rivets solid 100 countersunk normal head in corrosion resisting steel FE-PA2601 passivated inch based series German version EN 3140 2001《航空航天系列 .pdf

DIN EN 3141-1996 Aerospace series - Rivets solid universal head in head resisting nickel base alloy NI-P11 cadmium plated inch based series German version EN 3141 1996《航空航天系列 耐高温镍基.pdf

DIN EN 3142-1996 Aerospace series - Rivets solid universal head in heat resisting nickel base alloy NI-P11 inch based series German version EN 3142 1996《航空航天系列 耐高温镍基合金钢NI-P11带通用头的全.pdf

DIN EN 3145-2003 Aerospace series - Round bars hot rolled in steel - Normal tolerances Diameter 6 mm D 250 mm Dimensions German and English version EN 3145 2001《航空航天系列 热轧圆钢棒 标称公差 直.pdf