MSZ 3824-1958 《带齿轮和反向圆盘锤子》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 7333-1962 Eyeletts for cardboard labels《纸板标签孔》.pdf

DIN 7338-2011 Rivets for brake linings and clutch linings《制动装置衬里和离合器衬里的铆钉》.pdf

DIN 7339-2011 Hollow rivets one piece drawn from strip《带材拉制的单件空心铆钉》.pdf

DIN 7340-2011 Tubular rivets cut from the tube《管材切制的空心铆钉》.pdf

DIN 7341-1977 Rivet Pins《铆钉》.pdf

DIN 7349-2009 Plain washers for bolts with heavy clamping sleeves《带重型夹紧套的螺栓用平垫圈》.pdf

DIN 7353-2014 Marking punches《标记穿孔机》.pdf

DIN 7355-1970 Serial lifting equipment jacks《系列提升设备，起重器》.pdf

DIN 736-2011 Rolling bearings - Plummer block housings for rolling bearings of diameter series 2 with tapered bore and adapter sleeve《滚动轴承 直径系列2带锥形孔和紧定套的滚动轴承用带凸台轴承座》.pdf