MSZ 4702 9-1982 《MSZ 4702 9－82水泥 铝钠水泥》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F2079-2002(2008) Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents.pdf

ASTM F2079-2009 Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents《测量气球反冲力的标准试验方法 可膨胀幅度》.pdf

ASTM F2079-2009(2013) Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents《测量球囊扩张支架固有弹性反冲的标准试验方法》.pdf

ASTM F2079-2009(2017) Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents《测量球囊扩张支架固有弹性反冲的标准试验方法》.pdf

ASTM F2080-2005 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe《交联聚乙烯(PEX)管用带金属压缩套的冷膨胀管件的标准规范》.pdf

ASTM F2080-2008 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe.pdf

ASTM F2080-2009 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe《交联聚乙烯(PEX)管用带金属压缩套的冷膨胀管件的标准规范》.pdf

ASTM F2080-2012 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe《交联聚乙烯 (PEX) 管用带金属压合套筒的冷膨胀管件的标准规范》.pdf

ASTM F2080-2012e1 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene &40 PEX&41 Pipe《交联聚乙烯(PEX)管用带金属压缩套的冷膨胀管件的标准规格》.pdf