MSZ 5199 5 lap-1962 《安装钻孔以及与中部深入到一个未知的蓄水层》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D820-A-2008 POLYETHYLENE (PE) FOAM CROSSLINKED CLOSED CELL 48 KG M3 TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯泡沫机交联闭路电池v与WSS-M99P1111-A号福特材料一起使用([用于WSS-M99P32-B号福特材料]》.pdf

FORD WSK-M4D820-A2-2008 POLYETHYLENE (PE) FOAM CROSSLINKED CLOSED CELL 48 KG M3 TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯(PE)泡沫化学交联密闭槽 48kg m3 (与FORD WSS-M99P1111-A一起使用) [使用 FORD .pdf

FORD WSK-M4D822-A-2014 POLYAMIDE 6 (PA6) HEAT STABILIZED 40% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D823-A-2006 POLYAMIDE 66 (PA66) HEAT STABILIZED 40% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《具有热稳定性的聚酰胺66(PA66) 40%玻璃纤维 矿物强.pdf

FORD WSK-M4D827-A-2011 ABS MOLDING COMPOUND HIGH HEAT RESISTANT HIGH IMPACT LOW GLOSS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部耐高温有耐冲击强度的低光泽度丙烯腈模塑材料 与福特WSS-M99P1111-A 一起.pdf

FORD WSK-M4D827-A2-2009 ABS MOLDING COMPOUND HIGH HEAT RESISTANT HIGH IMPACT LOW GLOSS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用低光亮耐高温、高抗冲丙烯腈-丁二烯-苯乙烯共聚物(ABS)成型料 与标准FOR.pdf

FORD WSK-M4D829-A-2006 POLYAMIDE 12 (PA12) HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定、30%玻璃纤维增强的聚酰胺12成型料 与标准FORD WSS-M.pdf

FORD WSK-M4D830-A-2010 POLYETHYLENE TEREPHTALATE (PET) FILM TRANSPARENT TO BE USED WITH FORD WSS-M99P1111-A 《透明聚对苯二甲酸乙二酯（PET）薄膜 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D836-A-2012 ABS HIGH HEAT ELECTROPLATING GRADE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf