MSZ 8464-1982 《螺母柜》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ANSI ISA 12.12.01-2015 Nonincendive Electrical Equipment for Use in Class I and II Division 2 and Class III Divisions 1 and 2 Hazardous (Classified) Locations.pdf

ANSI ISA 12.12.03-2011 Standard for Portable Electronic Products Suitable for Use in Class I and II Division 2 Class I Zone 2 and Class III Division 1 and 2 Hazardous (Classified) .pdf

ANSI ISA 12.13.04-2007 Performance Requirements for Open Path Combustible Gas Detectors (First Edition).pdf

ANSI ISA 12.20.01-2009 General Requirements for Electrical Ignition Systems for Internal Combustion Engines in Class I Division 2 or Zone 2 Hazardous (Classified) Locations《I级2区或2区.pdf

ANSI ISA 12.27.01-2011 Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids《电气系统与易燃或可燃加工液体之间的工艺密封的要求》.pdf

ANSI ISA 18.2-2016 Management of Alarm Systems for the Process Industries.pdf

ANSI ISA 5.06.01-2007 Functional Requirements Documentation for Control Software Applications《控制软件应用的功能要求文件》.pdf

ANSI ISA 5.1-2009 Instrumentation Symbols and Identification《仪器仪表符号和标志》.pdf

ANSI ISA 50.00.01-1975 Compatibility of Analog Signals for Electronic Industrial Process Instruments《电子工业加工仪器用模拟信号的兼容性》.pdf