2019年春八年级数学下册第3章图形与坐标本章中考演练练习(新版)湘教版.docx

上传人:王申宇 文档编号:919937 上传时间:2019-03-03 格式:DOCX 页数:4 大小:297.46KB
下载 相关 举报
2019年春八年级数学下册第3章图形与坐标本章中考演练练习(新版)湘教版.docx_第1页
第1页 / 共4页
2019年春八年级数学下册第3章图形与坐标本章中考演练练习(新版)湘教版.docx_第2页
第2页 / 共4页
2019年春八年级数学下册第3章图形与坐标本章中考演练练习(新版)湘教版.docx_第3页
第3页 / 共4页
2019年春八年级数学下册第3章图形与坐标本章中考演练练习(新版)湘教版.docx_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、1本章中考演练一、选择题12018成都在平面直角坐标系中,点 P(3,5)关于原点对称的点的坐标是( )A(3,5) B(3,5)C(3,5) D(3,5)22018扬州在平面直角坐标系的第二象限内有一点 M,点 M到 x轴的距离为 3,到y轴的距离为 4,则点 M的坐标是( )A(3,4) B(4,3)C(4,3) D(3,4)32017邵阳如图 3Y1 所示,三架飞机 P,Q,R 保持编队飞行,某时刻在坐标系中的坐标分别为(1,1),(3,1),(1,1),30 秒后,飞机 P飞到 P(4,3)的位置,则飞机 Q,R 的位置 Q,R分别为( )图 3Y1AQ(2,3),R(4,1) BQ(

2、2,3),R(2,1) CQ(2,2),R(4,1) DQ(3,3),R(3,1)4.2018济宁如图 3Y2,在平面直角坐标系中,点 A,C 在 x轴上,点 C的坐标为(1,0),AC2.将 RtABC 先绕点 C顺时针旋转 90,再向右平移 3个单位,则变换后点 A的对应点的坐标是( )图 3Y2A(2,2) B(1,2)C(1,2) D(2,1)52018青岛如图 3Y3,将线段 AB绕点 P按顺时针方向旋转 90,得到线段AB,其中点 A,B 的对应点分别是点 A,B,则点 A的坐标是( )图 3Y3A(1,3) B(4,0)C(3,3) D(5,1)2二、填空题62018南京在平面直

3、角坐标系中,点 A的坐标是(1,2),作点 A关于 y轴的对称点,得到点 A,再将点 A向下平移 4个单位,得到点 A,则点 A的坐标是(_,_)72018达州如图 3Y4,平面直角坐标系中,矩形 OABC的顶点 A(6,0),C(0,2 )将矩形 OABC绕点 O顺时针方向旋转,使点 A恰好落在 OB上的点 A1处,则点3B的对应点 B1的坐标为_图 3Y4三、解答题82017达州探究:小明在求同一坐标轴上两点间的距离时发现,对于平面直角坐标系内任意两点 P1(x1,y 1),P 2(x2,y 2),可通过构造直角三角形利用图 3Y5得到结论:P1P2 ,他还利用图证明了线段 P1P2的中点

4、 P(x,y)的坐标( x2 x1) 2 ( y2 y1) 2公式:x ,y .x1 x22 y1 y22图 3Y5(1)请你帮小明写出中点坐标公式的证明过程(2)a.已知点 M(2,1),N(3,5),则线段 MN的长度为_;b直接写出以点 A(2,2),B(2,0),C(3,1),D 为顶点的平行四边形的顶点 D的坐标:_3详解详析1.解析 C 因为关于原点对称的点的坐标特点是横、纵坐标均互为相反数,即P(x,y)关于原点对称的点 P(x,y) ,所以 P(3,5)关于原点对称的点的坐标为(3,5).故选 C.2.解析 C 设点 M的坐标为(x,y) ,点 M在第二象限内,则 x0,y0;

5、点 M到 x轴的距离为 3,到 y轴的距离为 4,x4,y3.故选 C.3.解析 A 由点 P(1,1)到点 P(4,3) ,知编队需向右平移 5个单位,再向上平移 2个单位,点 Q(3,1)的对应点 Q的坐标为(2,3) ,点 R(1,1)的对应点 R的坐标为(4,1).故选 A.4.解析 A 将 RtABC 先绕点 C顺时针旋转 90,再向右平移 3个单位长度,则图形中的点 A也先绕点 C顺时针旋转 90,再向右平移 3个单位,因此,点 A也先绕点 C顺时针旋转 90后对应点的坐标为(1,2) ,再向右平移 3个单位后对应点的坐标为(2,2).故选 A.5.解析 D 如图,连接 AP,作

6、APAP 于点 P,并使得 APAP,则 A为求作的点,由图形可得出点 A的坐标为(5,1).故选 D.6.答案 1 2解析 点 A(1,2)关于 y轴的对称点 A的坐标为(1,2) ,再将点 A向下平移4个单位,得到点 A的坐标为(1,2).7.答案 (2 ,6)3解析 如图,过点 B1,作 B1,Ey 轴于点 E.矩形 OABC的顶点 A(6,0) ,C(0,2 ).OA6,AB OC2 .OB 4 2AB,3 3 62 ( 2 3) 2 3AOB30.在 RtDOC 1中,DOC 130,OC 12 ,3OD4,DC 12.B 1C16,B 1D4.在 RtDEB 1中,DB 1E30,

7、DE2,B 1E2 .在 RtOC 1D中,OC 12 ,C 1OD30,3 3OD4,OE6.B 1(2 ,6).38.解:(1)证明:P 1(x 1,y 1) ,P 2(x 2,y 2) ,Q 1Q2OQ 2OQ 1x 2x 1,Q 1Q ,x2 x124OQOQ 1Q 1Qx 1 .x2 x12 x1 x22P 为 P1,P 2的中点,H 为 P1G的中点,PH .P1Q1y 1,P2G2 y2 y12PQy 1 .y2 y12 y2 y12即线段 P1P2的中点 P(x,y)的坐标公式为 x ,y .x1 x22 y1 y22(2)a.M(2,1) ,N(3,5) ,MN .( 2 3) 2 ( 1 5) 2 61b.A(2,2) ,B(2,0) ,C(3,1) ,当 AB为平行四边形的对角线时,其对称中心的坐标为(0,1).设 D(x,y) ,则 x30,y(1)2,解得 x3,y3,此时点 D的坐标为(3,3).当 AC为平行四边形的对角线时,同理可求得点 D的坐标为(7,1) ,当 BC为平行四边形的对角线时,同理可求得点 D的坐标为(1,3).综上可知,点 D的坐标为(3,3)或(7,1)或(1,3).故答案为(3,3)或(7,1)或(1,3).

展开阅读全文
相关资源
猜你喜欢
  • BS EN ISO 13935-2-2014 Textiles Seam tensile properties of fabrics and made-up textile articles Determination of maximum force to seam rupture using the grab method《纺织品 织物及其制品接缝拉伸特.pdf BS EN ISO 13935-2-2014 Textiles Seam tensile properties of fabrics and made-up textile articles Determination of maximum force to seam rupture using the grab method《纺织品 织物及其制品接缝拉伸特.pdf
  • BS EN ISO 13936-1-2004 Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Fixed seam opening method《纺织物 机织物中缝合处纱线的抗滑脱性测定 固定接缝打开法》.pdf BS EN ISO 13936-1-2004 Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Fixed seam opening method《纺织物 机织物中缝合处纱线的抗滑脱性测定 固定接缝打开法》.pdf
  • BS EN ISO 13936-2-2004 Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Fixed load method《纺织品 机织物中缝合处纱线的抗滑脱性测定 固定荷载法》.pdf BS EN ISO 13936-2-2004 Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Fixed load method《纺织品 机织物中缝合处纱线的抗滑脱性测定 固定荷载法》.pdf
  • BS EN ISO 13936-3-2007 Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Needle clamp method《纺织品 机织织物中缝合处纱线抗滑脱性的测定 第3部分 针夹法》.pdf BS EN ISO 13936-3-2007 Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Needle clamp method《纺织品 机织织物中缝合处纱线抗滑脱性的测定 第3部分 针夹法》.pdf
  • BS EN ISO 13937-1-2000 Textiles Tear properties of fabrics Determination of tear force using ballistic pendulum method (Elmendorf)《纺织品 织物撕裂特性 用冲击摆锤方法测定撕裂力(埃尔门多夫)》.pdf BS EN ISO 13937-1-2000 Textiles Tear properties of fabrics Determination of tear force using ballistic pendulum method (Elmendorf)《纺织品 织物撕裂特性 用冲击摆锤方法测定撕裂力(埃尔门多夫)》.pdf
  • BS EN ISO 13937-2-2000 Textiles Tear properties of fabrics Determination of tear force of trouser-shaped test specimens (single tear method)《纺织品 织物撕裂特性 裤形试样撕裂力的测定(单撕裂法)》.pdf BS EN ISO 13937-2-2000 Textiles Tear properties of fabrics Determination of tear force of trouser-shaped test specimens (single tear method)《纺织品 织物撕裂特性 裤形试样撕裂力的测定(单撕裂法)》.pdf
  • BS EN ISO 13937-3-2000 Textiles Tear properties of fabrics Determination of tear force of wing-shaped test specimens (single tear method)《纺织品 织物撕裂特性 翼形试样撕裂力的测定(单撕裂法)》.pdf BS EN ISO 13937-3-2000 Textiles Tear properties of fabrics Determination of tear force of wing-shaped test specimens (single tear method)《纺织品 织物撕裂特性 翼形试样撕裂力的测定(单撕裂法)》.pdf
  • BS EN ISO 13937-4-2000 Textiles Tear properties of fabrics Determination of tear force of tongue-shaped test specimens (double tear test)《纺织品 织物撕裂特性 舌形试样撕裂力的测定(双撕裂法)》.pdf BS EN ISO 13937-4-2000 Textiles Tear properties of fabrics Determination of tear force of tongue-shaped test specimens (double tear test)《纺织品 织物撕裂特性 舌形试样撕裂力的测定(双撕裂法)》.pdf
  • BS EN ISO 13938-1-1999 Textiles - Bursting properties of fabrics - Hydraulic method for determination of bursting strength and bursting distension《纺织品 纤维胀破特性 胀破强度和胀破膨胀测定的液压方法》.pdf BS EN ISO 13938-1-1999 Textiles - Bursting properties of fabrics - Hydraulic method for determination of bursting strength and bursting distension《纺织品 纤维胀破特性 胀破强度和胀破膨胀测定的液压方法》.pdf
  • 相关搜索

    当前位置:首页 > 考试资料 > 中学考试

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1