1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 1 of 1 NAVISTAR, INC. Material, Parts, and Process Specifications (
2、MPAPS) NUMBER: MPAPS S-BM-0.0 Former Designation: ESP-BM-0.0 TITLE: Table of Contents Section BM Bolts Metric Series CURRENT REV No.: 1506 DATE: June 2015 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: ESP-BM-0.0 - January 2001 PRINTED COPIES OF THIS DOCUMENT
3、 MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to det
4、ermine the applicability of regulatory limits prior to use. Change Notice: Changed to New MPAPS format. Hex Head Bolts-Metric Series MPAPS S-BM-1.101-GS/PL Hex Flange Head Bolts-Metric Series MPAPS S-BM-3.101-GS/PL Prevailing-Torque Hex Head Bolts-Metric Series MPAPS S-BM-4.101-GS/PL General Purpose Studs-Metric Series MPAPS S-BM-5.101-GS/PL Round Head Short Square Neck (Carriage) Bolts-Metric Series MPAPS S-BM-11.101-GS/PL Projection Weld Studs-Metric Series MPAPS S-BM-30.101-GS/PL Projection Weld Studs with Pilot Point- Metric Series MPAPS S-BM-32.101-GS/PL
