NAVY UFGS-01 57 19 01 20-2010 SUPPLEMENTAL TEMPORARY ENVIRONMENTAL CONTROLS《补充临时环境控制》.pdf

上传人:cleanass300 文档编号:984695 上传时间:2019-03-12 格式:PDF 页数:25 大小:78.13KB
下载 相关 举报
NAVY UFGS-01 57 19 01 20-2010 SUPPLEMENTAL TEMPORARY ENVIRONMENTAL CONTROLS《补充临时环境控制》.pdf_第1页
第1页 / 共25页
NAVY UFGS-01 57 19 01 20-2010 SUPPLEMENTAL TEMPORARY ENVIRONMENTAL CONTROLS《补充临时环境控制》.pdf_第2页
第2页 / 共25页
NAVY UFGS-01 57 19 01 20-2010 SUPPLEMENTAL TEMPORARY ENVIRONMENTAL CONTROLS《补充临时环境控制》.pdf_第3页
第3页 / 共25页
NAVY UFGS-01 57 19 01 20-2010 SUPPLEMENTAL TEMPORARY ENVIRONMENTAL CONTROLS《补充临时环境控制》.pdf_第4页
第4页 / 共25页
NAVY UFGS-01 57 19 01 20-2010 SUPPLEMENTAL TEMPORARY ENVIRONMENTAL CONTROLS《补充临时环境控制》.pdf_第5页
第5页 / 共25页
点击查看更多>>
资源描述

1、USACE / NAVFAC / AFCESA / NASA UFGS-01 57 19.01 20 (February 2010)-Preparing Activity: NAVFAC Superseding UFGS 01 57 19.01 (August 2008) UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION TABLE OF CONTENTSDIVISION 01 - GENERAL REQUIREMENTSSECTION 0

2、1 57 19.01 20SUPPLEMENTAL TEMPORARY ENVIRONMENTAL CONTROLS02/10PART 1 GENERAL1.1 REFERENCES1.2 SUBMITTALS1.3 REGIONAL REQUIREMENTS1.3.1 Mid-Atlantic and DC1.3.1.1 Virginia1.3.1.2 Maryland1.3.1.3 West Virginia1.3.1.4 Pennsylvania1.3.1.5 New Jersey1.3.1.6 North Carolina1.3.1.7 New York1.3.1.8 Main1.3.

3、1.9 District of Columbia1.3.1.10 Other Northeast States1.3.2 MIDWEST1.3.2.1 Illinois1.3.2.2 Indiana1.3.2.3 Tennessee1.3.2.4 Other Midwest States1.3.3 NORTHWEST1.3.3.1 Oregon1.3.3.2 Washington1.3.3.3 Other Northwest States1.3.4 SOUTHEAST1.3.4.1 Florida1.3.4.2 Georgia1.3.4.3 Mississippi1.3.4.4 South C

4、arolina1.3.4.5 Texas1.3.4.6 Other Southeast States1.3.5 SOUTHWEST1.3.5.1 Arizona1.3.5.2 California1.3.5.3 NevadaSECTION 01 57 19.01 20 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.3.5.4 Other Southwest States1.3.6 PACIFIC1.3.6.1 Hawaii1.3.

5、6.2 Guam1.3.6.3 Japan1.3.7 EUROPE1.3.7.1 Italy1.3.7.2 Spain1.3.7.3 Greece1.3.7.4 Other European CountriesPART 2 PRODUCTSPART 3 EXECUTION- End of Section Table of Contents -SECTION 01 57 19.01 20 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*

6、USACE / NAVFAC / AFCESA / NASA UFGS-01 57 19.01 20 (February 2010)-Preparing Activity: NAVFAC Superseding UFGS 01 57 19.01 (August 2008) UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION 01 57 19.01 20SUPPLEMENTAL TEMPORARY ENVIRONMENTAL CONTROLS02

7、/10*NOTE: This guide specification covers the requirements for state and local environmental protection and for environmental temporary controls. The purpose of this document is to supplement Section 01 57 19.00 20 TEMPORARY ENVIRONMENTAL CONTROLS with specific State and Local requirements. Do not r

8、epeat what is already provided in the national version of the specification.To assist specification editors and contractors with finding all of the pertinent sections, the requirements are arranged by Region, then State and Installation. Rather than writing the same State requirement for every insta

9、llation in a given state, the requirement should be listed under that state. If a requirement only applies at a specific installation, list it under the appropriate installation.Only edit the parts of this specification section that have bracketed choices.Many States and Municipalities have more str

10、ingent or additional requirements. Modify this section to include State and Local differences as required to suit local conditions and regulations.Comments and suggestions on this guide specification are welcome and should be directed to the technical proponent of the specification. A listing of Tec

11、hnical Proponents, including their organization designation and telephone number, is on the internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).Use of electronic communication is encouraged.Brackets are used in the text to indicate designer choices or locati

12、ons where text must be supplied by SECTION 01 57 19.01 20 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-the designer.*PART 1 GENERAL1.1 REFERENCES*NOTE: These references are only for State specific requirements and supplement the references i

13、n Section 01 57 19.00 20, TEMPORARY ENVIRONMENTAL CONTROLS. This paragraph is used to list the publications cited in the text of the guide specification. The publication are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.S

14、elect the appropriate FEC/Region where work is being done and delete the un-used Regions.If you are using SpecsIntact, use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also us

15、e the Reference Wizards Check Reference feature to update the issue dates.If you are using SpecsIntact, references not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications

16、listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only. If state or local references are not provided here, refer to Section 01 57 19.00 20 TEMPORARY ENVIRONMENTAL CONTROLS for appropriate references.MID

17、LANT*NOTE to FEC: For each state listed below, the FEC should edit the section to include state or local specific references that will be called out in later portions of this document.*North CarolinaVirginiaWest VirginiaMarylandPennsylvaniaNew JerseyMaineRhode IslandNew YorkOther Northeast StatesSEC

18、TION 01 57 19.01 20 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIDWEST*NOTE to FEC: For each state listed below, the FEC should edit the section to include state or local specific references that will be called out in later portions of thi

19、s document.*IllinoisIndianaTennesseeOther Midwest StatesNORTHWEST*NOTE to FEC: For each state listed below, the FEC should edit the section to include state or local specific references that will be called out in later portions of this document.*OregonWashingtonNORTHWEST AIR POLLUTION AUTHORITY (NWA

20、PA)NWAPA Regulation Air RegulationOLYMPIC AIR POLLUTION CONTROL AUTHORITY (OAPCA)OAPCA Regulation Regulation 1PUGET SOUND CLEAN AIR AGENCY (PSCAA)PSCAA Regulation Regulation I, II, and IIIWASHINGTON STATE ADMINISTRATIVE CODE (WAC)WAC-173-303 Washington Dangerous Waste RegulationsWAC-246-290 Departme

21、nt of Health Drinking Water Regulation1.2 SUBMITTALS*NOTE: Review submittal description (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project. Submittals should be kept to a minimum required for adequate quality

22、control.A “G“ following a submittal item indicates that the submittal requires Government approval. Some submittals are already marked with a “G“. Only delete an existing “G“ if the submittal item is not complex and can be reviewed through the Contractors SECTION 01 57 19.01 20 Page 5Provided by IHS

23、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-Quality Control system Only add a “G“ if the submittal is sufficiently important are complex in context of the project.For submittals requiring Government approval on Army projects, a code of up to three characters wi

24、thin the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Management System (RMS) are: AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO

25、 for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NASA projects.Choose the first bracketed item for Navy, Air Force and NASA projects, or choose the second bracketed item for Army projects.*NOTE: Add addi

26、tional statement to include State or Local submittal requirements. Submittals added here must be called for and explained in the specification paragraph text within.Delete any inapplicable submittal requirements.*Government approval is required for submittals with a “G“ designation; submittals not h

27、aving a “G“ designation are for Contractor Quality Control approval.for information only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. The following shall be submitted in accordance with Section 01 33 00 SUBMITTAL PRO

28、CEDURES:SD-01 Preconstruction SubmittalsExcavation Permits; G*NOTE: Include the following submittal for NAVFAC SOUTHEAST projects at the Charleston Air Force Base and for other NAVFAC SOUTHEAST projects as determined by the Contracting Officer based on project size, scope, complexity, and visibility

29、Dirt and Dust Control Plan; G*NOTE: Include the following submittal for NAVFAC Pacific projects.*Storage Inventory Form; GSECTION 01 57 19.01 20 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SD-06 Test Reports_; G1.3 REGIONAL REQUIREMENTS*N

30、OTE: Installation specific requirements are listed under the Region and State where the installation is found. Each FEC shall insert the state and local requirements that apply to installations within their area of responsibility. If a state regulation applies to all installations, list it under the

31、 appropriate state. If language is specific to a particular installation, list it under that installation. The provided information is a template. FECs should add states and installations as necessary to complete the document.*NOTE: Select the appropriate FEC/Region where work is being done and dele

32、te the un-used Regions.*1.3.1 Mid-Atlantic and DC*NOTE: Applicable environmental requirements such as; erosion/sediment control, storm water, hazardous waste, and solid waste may have unique state regulations that exceed the requirements of UFGS Section 01 57 19.00 20, TEMPORARY ENVIRONMENTAL CONTRO

33、LS. The FEC should edit this section to include these unique state requirements for each state listed below.*NOTE: For each installation listed below, provide the following:1. Unique local requirements that exceed UFGS Section 01 57 19.00 20, TEMPORARYENVIRONMENTAL CONTROLS requirements and/or state

34、 regulations.2. Environmental Point of Contact information for design review and base specific requirements. 3. For every installation in area of responsibility, the FEC shall identify the facility Hazardous Waste Generator status as specified in Section 01 57 19.00 20 paragraph entitled “Facility H

35、azardous Waste Generator Status.“4. For each installation listed below, provide specific requirements of the installations Environmental Management System (EMS) that relate to construction operations. Identify those site specific EMS actions that the SECTION 01 57 19.01 20 Page 7Provided by IHSNot f

36、or ResaleNo reproduction or networking permitted without license from IHS-,-,-Contractor must perform under this contract.*1.3.1.1 Virginiaa. Norfolk Naval Stationb. NAB Little Creekc. NAS Oceana1.3.1.2 Marylanda. Patuxent River1.3.1.3 West Virginiaa. Sugar Grove1.3.1.4 Pennsylvania1.3.1.5 New Jerse

37、y1.3.1.6 North Carolinaa. MCB Camp Lejeune(1) Removal of Waste from Camp LejeuneRemove and dispose of rubbish and debris from Government property.(a.) Provide 24-hour advance written notice to the Contracting Office of Contractors intention to dispose of off base.(b.) Disposal at sites or landfills

38、not holding a valid state of North Carolina permit is specifically prohibited. The prohibition also applies to sites where a permit my have been applied for but not yet obtained.(c.) Off-base disposal of construction debris outside the parameters of this paragraph at site without State permits and/o

39、r not in accordance with regulatory requirements will require the Contractor at his own expense to remove, transport and relocate the debris to a State approved site. The Contractor will also be required to pay any fines, penalties, or fees related to the illegal disposal of construction debris.(d.)

40、 Metal will not be accepted at the Base Sanitary Landfill. Materials which may be deposited in the landfill include:CATEGORY CONSTRUCTION DEBRIS DISPOSAL - BASE SANITARYLANDFILL EXAMPLE/GENERAL INFORMATION FOR DEPOSITIN THE LANDFILLMixed Debris The following materials may be placed in the landfill i

41、n a location designated by the landfill SECTION 01 57 19.01 20 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-operator. These items may be mixed together.Sheetrock - plaster - glass (broken) Non asbestos insulation - (fiberglass and mineral wool will be bagged).Packing paper, Styrofoam, and pasteboard boxes Non-asbestos roofing mater

展开阅读全文
相关资源
猜你喜欢
  • EN 3444-2006 en Aerospace series - Bolt large bihexagonal head close tolerance normal shank medium length thread in heat resisting nickel base alloy passivated - Classification 1 2.pdf EN 3444-2006 en Aerospace series - Bolt large bihexagonal head close tolerance normal shank medium length thread in heat resisting nickel base alloy passivated - Classification 1 2.pdf
  • EN 3446-1995 en Aerospace Series - Bearings Precision Ball Without Flange in Corrosion Resisting Steel for Instruments and Equipment - Dimensions and Loads《航空航天系列 仪器和设备用有耐腐蚀钢法兰的精密球.pdf EN 3446-1995 en Aerospace Series - Bearings Precision Ball Without Flange in Corrosion Resisting Steel for Instruments and Equipment - Dimensions and Loads《航空航天系列 仪器和设备用有耐腐蚀钢法兰的精密球.pdf
  • EN 3451-2017 en Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forging stock for annealed forgings - a or D 300 mm.pdf EN 3451-2017 en Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forging stock for annealed forgings - a or D 300 mm.pdf
  • EN 3456-2012 en Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip hot rolled - a 6 mm《航空航天系列 TI-P64001(Ti-6Al-4V)型钛合金 退火 热轧薄板材和带材 a 6 mm》.pdf EN 3456-2012 en Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip hot rolled - a 6 mm《航空航天系列 TI-P64001(Ti-6Al-4V)型钛合金 退火 热轧薄板材和带材 a 6 mm》.pdf
  • EN 3459-2010 en Aerospace series - Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) - Solution treated and aged - Plate - 6 mm Less than a Less than or equal to 50 mm《航空航天系列 TI-P63001(Ti-.pdf EN 3459-2010 en Aerospace series - Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) - Solution treated and aged - Plate - 6 mm Less than a Less than or equal to 50 mm《航空航天系列 TI-P63001(Ti-.pdf
  • EN 3464-2012 en Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Plate - 6 mm  a 100 mm《航天航空系列 钛合金(TI-6AI-4V) 煅烧 板材 6 mm》.pdf EN 3464-2012 en Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Plate - 6 mm a 100 mm《航天航空系列 钛合金(TI-6AI-4V) 煅烧 板材 6 mm》.pdf
  • EN 3469-2009 en Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D less than or equa.pdf EN 3469-2009 en Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D less than or equa.pdf
  • EN 3474-2005 en Aluminium alloy AL-P2024-T81 Sheet and strip 0 25 mm  or = a  or = 6 mm《航空航天系列 铝合金AL-P2024-T81 薄板材和带材 0 25mm≥a≥6mm》.pdf EN 3474-2005 en Aluminium alloy AL-P2024-T81 Sheet and strip 0 25 mm or = a or = 6 mm《航空航天系列 铝合金AL-P2024-T81 薄板材和带材 0 25mm≥a≥6mm》.pdf
  • EN 3475-100-2010 en Aerospace series - Cables electrical aircraft use - Test methods - Part 100 General《航空航天系列 航空器用电缆 试验方法 总则》.pdf EN 3475-100-2010 en Aerospace series - Cables electrical aircraft use - Test methods - Part 100 General《航空航天系列 航空器用电缆 试验方法 总则》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1