NBN T 03-038-1979 6875 Nitric acid for industrial use - Determination of iron content -2 2-- Bipyridyl photometric method《工业用硝酸 含铁量的测定 2，2-联吡啶光度测定法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

MSZ 8520-1964 《燕型轴，纯硬质金属d1 = 80－160，》.pdf

MSZ 8521-1964 《铣床刀具头轴承 光滑的硬金属刀具，圆柱形接入凿孔d1 = 125－250 n》.pdf

MSZ 8522-1964 《平原，硬木，圆锥孔蛋白 准确》.pdf

MSZ 8523-1964 《铣床刀具头轴承，带光滑的硬金属 零件刀7 24圆锥形主轴头d1 = 200－400 n》.pdf

MSZ 8524-1963 《铣床轴心方向的光滑硬金属板的带把的刀具》.pdf

MSZ 8525-1963 《轴向固定绳索》.pdf

MSZ 8528-1963 《带快钢刀头的圆盘铣床 d1 = 80－315》.pdf

MSZ 8529-1963 《圆盘铣床快钢刀具》.pdf

MSZ 8531-1961 《晶体工业炸药》.pdf