NBN-EN 24032-1992 7500 《六角螺母 型号1 等级A和B》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 13235-1979 Relived woodworking cutters for tongue and groovs cutting Design and dimensions《榫和槽加工用木工套式铲齿铣刀 结构及尺寸》.pdf

GOST 13236-1983 Electrotechnical periclase powders Specifications《电气方镁石粉 规范》.pdf

GOST 13240-1978 Blanks of optical glass Specifications《光学玻璃坯料 技术条件》.pdf

GOST 13267-1973 Rotating electrical machines and directly connected them nonelectrical ones Shaft heights and control methods《电机及与之直接相连的非电机 旋转轴高度》.pdf

GOST 13268-1988 Tubular electric heaters《列管式电加热器》.pdf

GOST 13270-1985 Vulcanized rubber Method for determination of cristallization ability in compression《硫化橡胶 压缩结晶能力的测定方法》.pdf

GOST 13275-1987 Reels for magnetic tape with a nominal width of 6 30 mm Specifications《标称宽度为6 30 mm的磁带卷 规范》.pdf

GOST 13278-1977 Organic dyestuffs The methods of comparative dyeing for natural leather《有机染料 天燃革染色比较法》.pdf

GOST 13281-1993 Shaving machines Basic dimentions Standards of accuracy and rigidity《磨齿机 基本尺寸 精度和刚度规范》.pdf