NC 32-26-1986 Color industry Mascara Quality Specifications《染色工业 眉毛油 质量规格》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 15970-2014 en Natural gas - Measurement of properties - Volumetric properties density pressure temperature and compression factor《天然气 性能测量 容积性能 密度 压力 温度和压缩因子》.pdf

EN ISO 15971-2014 en Natural gas - Measurement of properties - Calorific value and Wobbe index《天然气 发热值和沃泊指数(ISO 15971 2008)》.pdf

EN ISO 15973-2000 en Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - AIA St《封闭型盘头抽芯盲铆钉 AIA St ISO 15973-2000》.pdf

EN ISO 15974-2000 en Closed End Blind Rivets with Break Pull Mandrel and Countersunk Head - AIA St《封闭型沉头抽芯盲铆钉 AIA St ISO 15974-2000》.pdf

EN ISO 15975-2002 en Closed end blind rivets with break pull mandrel and protruding head AI AIA《封闭型盘头抽芯盲铆钉 AI AIA ISO 15975-2002》.pdf

EN ISO 15976-2002 en Closed end blind rivets with break pull mandrel and protrudiing head - St St《带拐点拉心轴及凸头的闭端盲孔铆钉 St St》.pdf

EN ISO 15977-2002 en Open end blind rivets with break pull mandrel and protruding head AIA St《带拉断铁心和突头的开端盲铆钉 AlA St ISO 15977-2002》.pdf

EN ISO 15978-2002 en Open end blind rivets with break pull mandrel and countersunk head AIA St《带拉断铁心和埋头的开端盲铆钉AlA St ISO 15978-2002》.pdf

EN ISO 15979-2002 en Open end blind rivets with break pull mandrel and protruding head St St《带拉断铁心和突头的开端盲铆钉 St St ISO 15979-2002》.pdf