NC 44-27-1986 Ores Copper Concentrate Sampling《矿石 铜浓缩抽样》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 103-2-1977 ISO Metric Trapezoidal Screw Thread General Plan《ISO 米制梯形螺纹 螺纹总图》.pdf

DIN 103-3-1977 ISO Metric Trapezoidal Screw Thread Allowances and Tolerances for Trapezoidal Screw Threads of General Purpose《ISO 米制梯形螺纹 一般用途梯形螺纹的容差和公差》.pdf

DIN 103-4-1977 ISO Metric Trapezoidal Screw Thread Nominal Dimensions《ISO 米制梯形螺纹 标称尺寸》.pdf

DIN 103-5-1972 ISO Metric Trapezoidal Screw Threads Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter《ISO 米制梯形螺纹 标称直径8～100mm螺母螺纹的极限尺寸》.pdf

DIN 103-6-1972 ISO Metric Trapezoidal Screw Threads Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter《ISO 米制梯形螺纹 标称直径105～300mm螺母螺纹的极限尺寸》.pdf

DIN 103-7-1972 ISO Metric Trapezoidal Screw Threads Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter《ISO 米制梯形螺纹 标称直径8～100mm螺栓螺纹的极限尺寸》.pdf

DIN 103-8-1972 ISO Metric Trapezoidal Screw Threads Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter《ISO 米制梯形螺纹 标称直径105至300mm螺栓螺纹的极限尺寸》.pdf

DIN 103-9-1985 ISO metric trapezoidal screw threads gauging of external and internal threads gauge dimensions and design features《ISO 米制梯形螺纹 外螺纹与内螺纹用量规 量规尺寸和结构特征》.pdf

DIN 10304-2-1969 Determination of moisture content and dry substance of glucose syrup vacuum oven method《葡萄糖浆的水分含量和干物质的测定 真空干燥法》.pdf