NF A81-365-8-1993 Solft soldering fluxes Test methods Part 8 determination of zinc content 《软钎焊剂 试验方法 第8部分 锌含量的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 25501-1982 Stocks and semifinished products of non-ferrous metals and alloys Terms and definitions《有色金属及其合金的坯料及半制品 术语及定义》.pdf

GOST 25502-1982 Objective lenses Method for determining the photographic resolving power《镜头 摄影分辨能力测定方法》.pdf

GOST 25504-1982 Radionuclide ionizing radiation sealed sources Terms and definitions《封闭式放射性核素电离辐射源 术语和定义》.pdf

GOST 25505-1982 Motion-picture cameras Cartridge for 8-mm film type S model 1 Basic and joined dimensions《爱好者用电影摄影机 C型1式8mm影片盒 基本尺寸和连接尺寸》.pdf

GOST 25506-1982 Textile sheets Defects Terms and definitions《织物缺陷 术语与定义》.pdf

GOST 25507-1982 Woodworking equipment surface planers and thicknessers Basic parameters《木材加工设备 校准磨床 基本参数》.pdf

GOST 25508-1982 Woodworking equipment The mandrels of the shapers with lower spindles Joining dimensions《木材加工设备 下部装心轴的铣床刀杆 连接尺寸》.pdf

GOST 25510-1982 Woodworking equipment The ends of spindles of tenoning machines of frame structures Joining dimensions《木材加工设备 框式开榫床轴端 连接尺寸》.pdf

GOST 25513-1982 Gear testers Conventional designations Terms and definitions《齿轮测量仪器 图形符号 术语和定义》.pdf