NF C46-631-1991 FIP bus for exchange of informations between transmitters actuators and programmable controllers - Specification of conformance tests to standard NF C 46-604 Base b.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 3569-1978 Continuous Mechanical Handling Equipment Classification of Unit Loads《连续机械装卸设备 单元货物分类》.pdf

DIN ISO 3583-1987 Road vehicles pressure test connection for compressed-air pneumatic braking equipment identical with ISO 3583 edition 1984《道路车辆 压缩空气气动制动设备的压力试验连接 与ISO 3583 1984版相.pdf

DIN ISO 3585-1999 Borosilicate glass 3 3 - Properties (ISO 3585 1998)《3 3硼硅酸盐玻璃 特性(ISO 3585-1998)》.pdf

DIN ISO 3601-1-2013 Fluid power systems - O-rings - Part 1 Inside diameters cross-sections tolerances and designation codes (ISO 3601-1 2012 + Cor 1 2012)《液压动力系统 O型环 第1部分 内径 截面 公差和.pdf

DIN ISO 3601-2-2010 Fluid power systems - O-rings - Part 2 Housing dimensions for general applications (ISO 3601-2 2008)《液压动力系统 O型环 第2部分 一般应用的防护外壳尺寸规格(ISO 3601-2-2008)》.pdf

DIN ISO 3601-3-2010 Fluid power systems - O-Rings - Part 3 Quality acceptance criteria (ISO 3601-3 2005)《液压动力系统 O型环 第3部分 质量验收准则(ISO 3601-3-2005)》.pdf

DIN ISO 3601-4-2010 Fluid power systems - O-rings - Part 4 Anti-extrusion rings (back-up rings) (ISO 3601-4 2008)《液压动力系统 O型环 第4部分 反式挤压环(支撑环)(ISO 3601-4-2008)》.pdf

DIN ISO 362-1-2009 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1 M and N categories (ISO 362-1 2007 + Cor 1 2009)《道路车辆加速产生的噪声测量 工程学方法 第1部.pdf

DIN ISO 362-2-2010 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2 L category (ISO 362-2 2009)《道路车辆加速排放的噪音测量 工程测量法 第2部分 L类(ISO 362-2-2009)》.pdf