沉淀试验disc

1、 designation indicates theyear of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of lastreapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This test method covers the determination of fatigue oftire cords in rubber due to compression or extension, or both,using a disc fatigue tester. The fatigue is measured as a loss instrength.1.2 The values stated in eit。

2、signation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope*1.1 As the contamination of freshwater and saltwater eco-systems continues to be reduced through the implementation ofregulations governing both point and non-point sourcedischarges, there is a growing emphasis and concern re。

3、ely following the designation indicates theyear of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of lastreapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This test method covers the determination of fatigue oftire cords in rubber due to compression or extension, or both,using a disc fatigue tester. The fatigue is measured as a loss instrength.1.2 The val。

4、designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope*1.1 As the contamination of freshwater and saltwater eco-systems continues to be reduced through the implementation ofregulations governing both point and non-point source dis-charges, there is a growing emphasis and concer。

5、tes the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope*1.1 As the contamination of freshwater and saltwater eco-systems continues to be reduced through the implementation ofregulations governing both point and non-point source dis-charges, there is a growing emphasis and concern regardinghistorical i。

6、designation indicates theyear of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of lastreapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This test method covers the determination of fatigue oftire cords in rubber due to compression or extension, or both,using a disc fatigue tester. The fatigue is measured as a loss instrength.1.2 The values stated in eith。

7、t is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2012 SAE Internati。

8、ith a Disc Rig Micropitting TestDr. Miles G. Talks, QinetiQ, Ltd., and W. Bennett, Defence Equipment andSupport, MoDThe statements and opinions contained herein are those of the author and should not be construed as anofficial action or opinion of the American Gear Manufacturers Association.AbstractThe experimental work carried out was aimed at developing a test method that was able to consistentlyproduce micropitting damage and could discriminate between a good oil (i.e., one that rarely prod。

9、indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This test method covers the determination of fatigue oftire cords in rubber due to compression or extension, or both,using a disc fatigue tester. The fatigue is measured as a loss instrength.1.2 The values stated in either SI units or ot。

10、凝杯罐试验方法。
本标准与GBT 16881-1997相比主要变化如下：本标准名称修改为水的混凝、沉淀试杯试验方法；本标准增加了对高速度梯度(G值)试验要求。
本标准由中华人民共和国石油和化学工业协会提出。
本标准由全国化学标准化技术委员会水处理剂分会(SACTC 638C 5)归口。
本标准负责起草单位：光明化工研究设计院、同济大学、天津化工研究设计院。
本标准主要起草人：李成国、郭喜民、郭丰祥、李风亭、白莹。
本标准于1997年首次发布。
GBT 168812008水的混凝、沉淀试杯试验方法GBT 1688 120081范围本标准规定了水的混凝、沉淀试杯试验的试验装置、操作条件和操作步骤。
本标准适用于确定水的混凝、沉淀过程的工艺参数，包括：混凝剂、絮凝剂的种类、用量、水的pH值、温度、以及各种药剂的投加顺序等。
2规范性引用文件下列文件中的条款通过本标准的引用而成为本标准的条款。
凡是注Et期的引用文件，其随后所有的修改单(不包括勘误的内容)或修订舨均不适用于本标准，然而，鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。
凡是不注日期的引用文件，其最新版本适用。

11、17) 3 技术要求.(18) 3. 1 一般规定.(18) 3.2 常用水处理药剂.(21) 3. 3 速度梯度计算.(22) 4 试验方法.(23) 4, 1 操作步骤.（23)4. 2 模拟试验.
。

12、家标准化管理委员会厘111刖 置GBT 21119-2007S0 5529：1992本标准等同采用ISO 5529：1992孙麦沉淀指数测定Zeleny试验(英文版)。
为便于使用，本标准做了下列编辑性修改：a) 用“本标准”代替“本国际标准”一词；b)用小数点“”代替国际标准中作为小数点的逗号“，”；c)删除国际标准前言部分；d)根据GBT 11 2000中651的规定，对各章、条中原有各注作了重排序号。
本标准的附录A为规范性附录。
本标准由国家粮食局提出。
本标准由全国粮油标准化技术委员会归口。
本标准起草单位：国家粮食局科学研究院。
本标准主要起草人：林家永、陆晖。
GBT 211 19-20071S0 5529：1992小麦沉淀指数测定Zeleny试验1范围本标准规定了用于评价与小麦粉烘焙性能有关的小麦品质的一种试验方法，称为Zeleny沉淀指数试验。
本标准仅适用于普通小麦(Triticumaestlvum L)。
2规范性引用文件下列标准中的条款通过本标准的引用而成为本标准的条款。
凡是注日期的引用标准，其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标。

13、W.indd 1 15/05/2013 15:06BS ISO 15825:2017 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 15825:2017. It supersedes BS ISO 15825:2015 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PRI/50, Raw materials (including latex) for use in the rubber industry.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necess。