NF E60-021-1997 Machine-tools speeds and feeds 《机床 速度和走刀量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 28091-2-2014 Technical delivery conditions for gasket sheets - Part 2 Requirements and testing for fibre-based gasket materials (FA)《密封板的交货技术条件 第2部分 纤维基密封材料的要求和试验》.pdf

DIN 28091-3-2014 Technical delivery conditions for gasket sheets - Part 3 Requirements and testing for PTFE-based gasket materials (TF)《密封板的交货技术条件 第3部分 聚四氟乙烯基密封材料的要求和试验》.pdf

DIN 28091-4-2014 Technical delivery conditions for gasket sheets - Part 4 Requirements and testing for expanded graphite-based gasket materials (GR)《密封板的交货技术条件 第4部分 膨胀石墨基密封材料的要求和试验.pdf

DIN 28105-2002 Chemical equipment - Process equipment and vessels with two domed ends - Definitions nominal capacity nominal diameters main dimensions《化工设备 双端均为鼓形封头的容器 定义、公称容积、公称直径.pdf

DIN 28115-2003 Carbon steel nozzles - PN 10 to PN 40《碳钢喷嘴 PN 10 至 PN 40》.pdf

DIN 28117-2016 Block flanges for process apparatus - Connecting dimensions PN 10 to PN 40《容器和工艺设备块式法兰 连接尺寸PN 10至PN 40》.pdf

DIN 28120-2004 Circular sight glasses with case in main power connection《主动力连接中的有罩圆形观察孔》.pdf

DIN 28121-2004 Circular sight glasses with case in metal to metal contact type flanged joint《金属与金属接触式法兰连接中的有罩圆形观察孔》.pdf

DIN 28122-2004 Blank flanges with stainless steel facing of nominal sizes DN 125 to DN 500 and PN designations PN 10 to PN 40《公称尺寸DN125 至DN500、PN标示PN10至40的带不锈钢面的盲法兰》.pdf