NF M08-021-1999 Crude petroleum and petroleum products Transfer accountability Assessment of vessel experience factor on loading (VEFL) and vessel experience factor on discharging .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSF-M4D881-A-2008 ABS MOLDING COMPOUND CLEAR INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯透明模塑料 内部用(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D827-A FORD WSK-M4D82.pdf

FORD WSF-M4D897-A-2010 POLYAMIDE 46 (PA46) HEAT STABILIZED 50% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的50%玻璃纤维增强的聚酰胺46(PA46)成型料 与标准FORD.pdf

FORD WSF-M4D907-A-2010 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚亚苯基乙醚+聚酰胺混.pdf

FORD WSF-M4G351-A-2008 SEALANT SILICONE RUBBER ULTRAVIOLET AND MOISTURE CURED TO BE USED WITH FORD WSS-M99P1111-A 《紫外线和湿态固化硅橡胶密封剂(于FORD WSS-M99P1111-A一起使用)》.pdf

FORD WSF-M4G351-A2-2014 SEALANT SILICONE RUBBER ULTRAVIOLET AND MOISTURE CURED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSF-M4G353-A1-1995 SEALANT SILICONE RUBBER ONE COMPONENT MEHOXY CURED BLACK《甲氧基固化型黑色单组分硅橡胶密封剂》.pdf

FORD WSF-M4G356-A-1994 SEALANT SILICONE RUBBER TWO COMPONENT LOW VISCOSITY FORM IN PLACE《现场成型低粘度两组分硅橡胶密封剂》.pdf

FORD WSF-M4L5-A3-2012 MAGNET PERMANENT THERMOPLASTIC BONDED ORIENTED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSF-M4L7-A2-2012 MAGNET PERMANENT THERMOPLASTIC BONDED NON-ORIENTED TO BE USED WITH FORD WSS-M99P1111-A .pdf