ONORM A 6433-1986 Geometry quantities and units《几何学的量和单位》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C457 C457M-2010a Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete《硬化混凝土中的空腔系统的参数的显微镜检验的标准试验方法》.pdf

ASTM C457 C457M-2011 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete《硬化混凝土孔隙系统参数显微测定的标准试验方法》.pdf

ASTM C457 C457M-2012 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete《硬化混凝土空气孔隙系统参数显微测定的标准试验方法》.pdf

ASTM C457 C457M-2016 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete《硬化混凝土中孔隙系统参数显微测定试验方法》.pdf

ASTM C457-2006 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete《显微法测定硬化混凝土中孔隙系统参数的标准试验方法》.pdf

ASTM C457-2008a Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete.pdf

ASTM C457-2008b Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete.pdf

ASTM C457-2008c Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete.pdf

ASTM C457-2008d Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete.pdf