REG NASA-LLIS-0873-2000 Lessons Learned Use of Detailed Procedures on Critical Equipment.pdf

上传人:孙刚 文档编号:1018519 上传时间:2019-03-21 格式:PDF 页数:2 大小:13.11KB
下载 相关 举报
REG NASA-LLIS-0873-2000 Lessons Learned Use of Detailed Procedures on Critical Equipment.pdf_第1页
第1页 / 共2页
REG NASA-LLIS-0873-2000 Lessons Learned Use of Detailed Procedures on Critical Equipment.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Lessons Learned Entry: 0873Lesson Info:a71 Lesson Number: 0873a71 Lesson Date: 2000-02-29a71 Submitting Organization: JSCa71 Submitted by: Larry GreggSubject: Use of Detailed Procedures on Critical Equipment Description of Driving Event: On May 16, 1994, an AMDAHL 5995M mainframe computer overheated

2、 at approximately 8:20 AM in the Software Production Facility (SPF) in Building 30 at JSC. Physical damage to the computer due to this overheat was estimated at $669,000. This overheat occurred due to an inadvertent miswiring of a circuit breaker after a routine power outage and maintenance of the b

3、reaker. The quality inspection failed to check for the proper rewiring of the circuit breaker. The miswiring caused a phase rotation of the power, which in turn caused fans cooling the AMDAHL 2550 to turn backwards. Power isolation and monitoring equipment that could have prevented any impact from t

4、he phase rotation was not properly utilized. This led to insufficient cooling of the AMDAHL 2550 which resulted in the overheat and subsequent damage.Lesson(s) Learned: All work on critical equipment and its supporting interfaces (e.g., power, cooling) should follow clearly written, detailed procedu

5、res that are understood by all personnel who operate or work with that equipment.Recommendation(s): Detailed procedures should be developed and used; and operations and maintenance personnel should be trained in power-up and power-down procedures.Evidence of Recurrence Control Effectiveness: N/AProv

6、ided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Documents Related to Lesson: N/AMission Directorate(s): a71 Exploration Systemsa71 Sciencea71 Space Operationsa71 Aeronautics ResearchAdditional Key Phrase(s): a71 Communication Systemsa71 Computersa71 Conf

7、iguration Managementa71 Environmenta71 Energya71 Facilitiesa71 Ground Operationsa71 Ground Equipmenta71 Hardwarea71 Industrial Operationsa71 Information Technology/Systemsa71 Parts Materials & Processesa71 Spacecrafta71 Test Articlea71 Test Facilitya71 Test & VerificationAdditional Info: Approval Info: a71 Approval Date: 2000-04-11a71 Approval Name: Eric Raynora71 Approval Organization: QSa71 Approval Phone Number: 202-358-4738Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • EN ISO 14116-2015 en Protective clothing - Protection against flame - Limited flame spread materials material assemblies and clothing《防护服 防止火焰 有限火焰蔓延的材料 材料组件和服装(ISO14116 2015)》.pdf EN ISO 14116-2015 en Protective clothing - Protection against flame - Limited flame spread materials material assemblies and clothing《防护服 防止火焰 有限火焰蔓延的材料 材料组件和服装(ISO14116 2015)》.pdf
  • EN ISO 14118-2018 en Safety of machinery - Prevention of unexpected start-up.pdf EN ISO 14118-2018 en Safety of machinery - Prevention of unexpected start-up.pdf
  • EN ISO 14119-2013 en Safety of machinery - Interlocking devices associated with guards - Principles for design and selection《机械安全性 带有联锁装置的保护装置 设计和选择原则》.pdf EN ISO 14119-2013 en Safety of machinery - Interlocking devices associated with guards - Principles for design and selection《机械安全性 带有联锁装置的保护装置 设计和选择原则》.pdf
  • EN ISO 14120-2015 en Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards《机械安全 防护装置 固定式和活动式防护装置的设计和施工的一般要求(ISO 14120 2015.pdf EN ISO 14120-2015 en Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards《机械安全 防护装置 固定式和活动式防护装置的设计和施工的一般要求(ISO 14120 2015.pdf
  • EN ISO 14122-1-2016 en Safety of machinery - Permanent means of access to machinery - Part 1 Choice of fixed means and general requirements of access《机械安-固定方式进入机械的-第1部分 选择固定方式和一般要求.pdf EN ISO 14122-1-2016 en Safety of machinery - Permanent means of access to machinery - Part 1 Choice of fixed means and general requirements of access《机械安-固定方式进入机械的-第1部分 选择固定方式和一般要求.pdf
  • EN ISO 14122-2-2016 en Safety of machinery - Permanent means of access to machinery - Part 2 Working platforms and walkways《机械安全进入机器零件2永久性的方法 工作平台和通道(ISO 14122-2 2016)》.pdf EN ISO 14122-2-2016 en Safety of machinery - Permanent means of access to machinery - Part 2 Working platforms and walkways《机械安全进入机器零件2永久性的方法 工作平台和通道(ISO 14122-2 2016)》.pdf
  • EN ISO 14122-3-2016 en Safety of machinery - Permanent means of access to machinery - Part 3 Stairs stepladders and guard-rails《机械安全-固定方式进入机器和工业设备的 -第3部分 楼梯 阶梯和护栏》.pdf EN ISO 14122-3-2016 en Safety of machinery - Permanent means of access to machinery - Part 3 Stairs stepladders and guard-rails《机械安全-固定方式进入机器和工业设备的 -第3部分 楼梯 阶梯和护栏》.pdf
  • EN ISO 14122-4-2016 en Safety of machinery - Permanent means of access to machinery - Part 4 Fixed ladders《机械安全-进入机器零件-第4部分-固定方式 固定梯子(ISO 14122-4 2016)》.pdf EN ISO 14122-4-2016 en Safety of machinery - Permanent means of access to machinery - Part 4 Fixed ladders《机械安全-进入机器零件-第4部分-固定方式 固定梯子(ISO 14122-4 2016)》.pdf
  • EN ISO 14123-1-2015 en Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1 Principles and specifications for machin.pdf EN ISO 14123-1-2015 en Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1 Principles and specifications for machin.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1