1、AEROSPACE STANDARD WASHER, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS AS1736Copyright 2014 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, phot
2、ocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 1984-01REAFFIRMED 2007-09
3、REVISED 2014-01THIRD ANGLE PROJECTION CUSTODIAN: G-3/G-3A REV.DFEDERAL SUPPLY CLASS 4730 AS1736SHEET 1 OF 3REV. DPROCUREMENT SPECIFICATION: /3/ AS1730SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering sciences. Theuse ofthis
4、 report is entirely voluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised, reaffirmed, stabilized, orcancel
5、led. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS1736DRATIONALE HARMONIZED 17-7 MATERIAL OPTIONS WITH AS1715. FIGURE 1 - WASHER AEROSPACE STANDARD AS1736SHEET 2 OF 3REV. DWASH
6、ER, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS TABLE 1 - WASHER DIMENSIONS AND WEIGHTS BASIC NO. AS1736SIZECODE /14/ MATERIAL /1/ NOMINAL TUBE SIZEREF A.0025 B C D WEIGHT LB/EAAPPROX REF 04050608101216202428323640444856647280GLASS EPOXY GLASS EPOXY GLASS EPOXY GLASS EPOXY ALUMIN
7、UM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM ALUMINUM CRESCRESCRES.250 .313 .375 .500 .625 .750 1.000 1.250 1.500 1.750 2.000 2.250 2.500 2.750 3.000 3.500 4.000 4.500 5.000 .5875 .6485 .6935 .8205 .9655 1.1315 1.3905 1.6325 1.8825 2.1425 2.3865 2.6425
8、 2.8925 3.1425 3.5175 4.0175 4.5175 5.0195 5.5045 .065 - .075 .065 - .075 .065 - .075 .065 - .075 .059 - .067 .059 - .067 .059 - .067 .059 - .067 .075 - .085 .075 - .085 .075 - .085 .085 - .095 .085 - .095 .085 - .095 .085 - .095 .085 - .095 .085 - .095 .085 - .095 .085 - .095 .083 - .090 .083 - .09
9、0 .074 - .081 .074 - .081 .084 - .092 .093 - .101 .097 - .105 .093 - .101 .093 - .101 .096 - .104 .093 - .101 .096 - .104 .096 - .104 .096 - .104 .159 - .167 .159 - .167 .154 - .162 .154 - .163 .147 - .155 .029 - .034 .029 - .034 .029 - .034 .029 - .034 .029 - .065 .029 - .065 .029 - .065 .029 - .06
10、5 .029 - .065 .029 - .065 .029 - .065 .029 - .065 .029 - .065 .029 - .065 .029 - .065 .029 - .065 .029 - .065 .029 - .065 .029 - .065 .001.001.001.001.002.002.003.003.004.005.006.007.008.009.015.018.055.062.065NOTES /1/ MATERIAL (ACCORDING TO SIZE): a. GLASS EPOXY IN ACCORDANCE WITH MIL-I-24768/2 (M
11、IL-P-18177) TYPE GEE (G-10) b. ALUMINUM ALLOY 2024-T3, T351 OR T3511 IN ACCORDANCE WITH AMS-QQ-A-250/4 c. ALUMINUM ALLOY 2024-T4 IN ACCORDANCE WITH AMS-QQ-A-225/6 OR AMS-QQ-A-250/4 d. CORROSION RESISTANT STEEL - 17-4PH IN ACCORDANCE WITH AMS5643, CONDITION H900 e. CORROSION RESISTANT STEEL - 17-7PH
12、IN ACCORDANCE WITH AMS5528, CONDITION RH950 OR TH950 PER AMS2759/3 OR AMS5529 CONDITION CH900 PER AMS2759/3. 2. FINISH: a. GLASS EPOXY - NONE b. ALUMINUM ALLOY - ANODIC COATING PER MIL-A-8625, TYPE II /6/ c. CORROSION RESISTANT STEEL - PASSIVATE PER AMS2700 TYPE 2 OR 8 /6/ /3/ PRODUCT SUPPLIED TO TH
13、IS SPECIFICATION SHALL BE MANUFACTURED BY AN ACCREDITED MANUFACTURER LISTED IN THE PERFORMANCE REVIEW INSTITUTE (PRI) QUALIFIED PRODUCTS LIST FOR PRI-QPL-AS1730 FOR THIS STANDARD. SEE www.eAuditN FOR CURRENT QPL ON-LINE. AEROSPACE STANDARD AS1736SHEET 3 OF 3REV. DWASHER, COUPLING, RIGID, FIXED CAVIT
14、Y, THREADED, FERRULE TYPE TUBE ENDS /4/ R .010 MAXIMUM FOR SIZES -04 THROUGH -08 ONLY. 5. GLASS EPOXY WASHERS FOR SIZES 04 THROUGH 08 MAY WEAR IN HIGH VIBRATION AREAS WHEN ASSEMBLIES ARE NOT TORQUED TO THE MINIMUM VALUE SPECIFIED IN AS1730. /6/ LUBRICATION: ALUMINUM ALLOY AND CORROSION RESISTANT STE
15、EL PARTS SHALL BE COATED ALL OVER WITH SOLID FILM LUBRICANT PER AS5272, TYPE 1 (MIL-L-46010 HAS BEEN SUPERSEDED BY MIL-PRF-26010). 7. RATED OPERATING CHARACTERISTICS: SEE AS1730. 8. MARKING: WASHERS SHALL BE BAGGED AND TAGGED PER AS478-35D WITH THE FOLLOWING MINIMUM INFORMATION: MANUFACTURERS NAME,
16、TRADEMARK OR CAGE CODE, COMPLETE “AS“ NUMBER, AND DATE OF MANUFACTURE IN QUARTERS (1Q82 = FIRST QUARTER 1982). 9. THESE COUPLING WASHERS ARE INTENDED FOR USE AS A COMPONENT OF THE TYPE I AND TYPE II RIGID COUPLING ASSEMBLIES AS DEFINED IN AS1731. 10. SURFACE TEXTURE: SYMBOLS PER ASME Y14.36M. REQUIR
17、EMENTS PER ASME B46.1. UNLESS OTHERWISE SPECIFIED, MACHINED SURFACES TO BE 125 MICROINCHES Ra. 11. BREAK EDGES .003 TO .015 UNLESS OTHERWISE SPECIFIED. 12. DIMENSIONING AND TOLERANCING: ASME Y14.5M-1994. 13. DIMENSIONS IN INCHES. UNLESS OTHERWISE SPECIFIED, TOLERANCES: LINEAR DIMENSIONS .010, ANGULA
18、R DIMENSIONS 2 DEGREES. /14/ EXAMPLE OF PART NUMBER: AS1736 - 16 BASIC WASHER NUMBER WASHER SIZE IN .062 INCH INCREMENTS (16 = 1 INCH TUBE SIZE) 15. A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.
