1、 AEROSPACE STANDARD BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBALT-NICKELALLOY, UNS R30159, 260 KSI MIN AS3623Copyright 2013 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form
2、or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/
3、www.sae.org ISSUED 2004-03REAFFIRMED 2013-10THIRD ANGLE PROJECTION CUSTODIAN: E-25 FEDERAL SUPPLY CLASS 5306 AS3623 SHEET 1 OF 14 PROCUREMENT SPECIFICATION: AS7475SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering sciences.
4、Theuse ofthis report is entirely voluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised, reaffirmed, stabili
5、zed, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS3623 RATIONALE AS3623 HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY. FIGURE 1 - BOLT AEROSPA
6、CE STANDARD AS3623 SHEET 2 OF 14 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 1A - DASH NUMBERS AND DIMENSIONS B - H TABLE 1B - DASH NUMBERS AND DIMENSIONS J - AB TABLE 1C - DASH NUMBERS AND DIMENSIONS AC - AH AEROSPACE ST
7、ANDARD AS3623 SHEET 3 OF 14 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN NOTES: 1. FOR PARTS WITH A MINIMUM SHANK LENGTH (DIM N) EQUAL TO OR LESS THAN 1.5D THE THREAD PD (DATUM -Z- ) SHALL REPLACE DATUM -Y- . 2. MATERIAL: COBALT
8、NICKEL ALLOY PER AMS 5842 (UNS R30159). 3. PROCUREMENT SPECIFICATION: AS7475. 4. FLUORESCENT PENETRANT INSPECTION PER ASTM E 1417. 5. SURFACE TEXTURE: SYMBOLS PER ASME Y14.36M. REQUIREMENTS PER ASME B46.1. UNLESS OTHERWISE SPECIFIED, SURFACES TO BE 125 MICROINCHES Ra. 6. BREAK SHARP EDGES .003 - .0
9、15, UNLESS OTHERWISE SPECIFIED. 7. DIMENSIONS IN INCHES. 8. DIMENSIONING AND TOLERANCING PER ANSI Y14.5-1982 (ASME PUBLICATION). 9. DO NOT USE UNASSIGNED PART NUMBERS. 10. THE PART NUMBER SHALL CONSIST OF THE BASIC PART NUMBER, FIRST DASH NUMBER DESIGNATING THE NOMINAL DIAMETER AND THE SECOND DASH N
10、UMBER DESIGNATING THE NOMINAL LENGTH IN SIXTEENTHS (.0625) OF AN INCH. EXAMPLE OF COMPLETE PART NUMBER: AS AND AMS ARE SOCIETY OF AUTOMOTIVE ENGINEERS, INC. PUBLICATIONS. ASME IS AN AMERICAN SOCIETY OF MECHANICAL ENGINEERS PUBLICATION. ASTM IS AN AMERICAN SOCIETY FOR TESTING AND MATERIALS PUBLICATIO
11、N. AEROSPACE STANDARD AS3623 SHEET 4 OF 14 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 2 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .1900 NOMINAL DIAMETER BOLTS AEROSPACE STANDARD AS3623 SHEET 5 OF 14 BOLT, MACHINE - D
12、OUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 3 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .2500 NOMINAL DIAMETER BOLTS AEROSPACE STANDARD AS3623 SHEET 6 OF 14 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBAL
13、T-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 4 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .3125 NOMINAL DIAMETER BOLTS AEROSPACE STANDARD AS3623 SHEET 7 OF 14 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 5 - PART NUMBE
14、R AND SHANK LENGTH DIMENSIONS FOR .3750 NOMINAL DIAMETER BOLTS AEROSPACE STANDARD AS3623 SHEET 8 OF 14 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 6 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .4375 NOMINAL DIAMETER BOL
15、TS AEROSPACE STANDARD AS3623 SHEET 9 OF 14 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 7 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .5000 NOMINAL DIAMETER BOLTS AEROSPACE STANDARD AS3623 SHEET 10 OF 14 BOLT, MACHINE -
16、DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 8 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .5625 NOMINAL DIAMETER BOLTS AEROSPACE STANDARD AS3623 SHEET 11 OF 14 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COB
17、ALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 9 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .6250 NOMINAL DIAMETER BOLTS AEROSPACE STANDARD AS3623 SHEET 12 OF 14 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 10 - PART N
18、UMBER AND SHANK LENGTH DIMENSIONS FOR .7500 NOMINAL DIAMETER BOLTS AEROSPACE STANDARD AS3623 SHEET 13 OF 14 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 11 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .8750 NOMINAL DIAMETER BOLTS AEROSPACE STANDARD AS3623 SHEET 14 OF 14 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN TABLE 12 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR 1.0000 NOMINAL DIAMETER BOLTS
