1、AEROSPACE STANDARD CONNECTOR, ELECTRIC, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, PLUG, CRIMP REMOVABLE PIN CONTACTS, CLASS EAS85028/1Copyright 2010 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transm
2、itted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE
3、WEB ADDRESS: http:/www.sae.org ISSUED 2004-06REVISED 2010-11THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 REV.AFEDERAL SUPPLY CLASS 5935 AS85028/1SHEET 1 OF 3REV. APROCUREMENT SPECIFICATION: AS85028SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of
4、 technicalandengineering sciences. Theuse ofthis report is entirely voluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time i
5、tmay bereaffirmed, revised, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS85028/1ARATIONALE LIMITED SCOPE REVISION REQUIRED TO INCORPORATE AS85028/1-1A. NOTICE THE
6、REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS SPECIFICATION SHEET AND THE LATEST ISSUE OF: SAE AS85028/1. FIGURE 1 AS85028/1 CONFIGURATION Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without l
7、icense from IHS-,-,-AEROSPACE STANDARD AS85028/1SHEET 2 OF 3REV. ACONNECTOR, ELECTRIC, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, PLUG, CRIMP REMOVABLE PIN CONTACTS, CLASS ETABLE 1 AS85028/1 CONTRUCTION DETAILS TYPE R TYPE R DASHNO. NO. OF CONTS ABSCBMAXC.007 DMAXEMAXFMAXGB
8、SCH.007 WEIGHT (GRAMS)MAX(WITH CONTACTS AND SEALS) INSERTARRANGEMENTMIL-STD-1674 1 52 .550 .997 1.090 1.150 1.562 1.775 1.900 2.275 73 10.1 2 80 .812 1.257 1.350 1.410 1.707 1.920 2.045 2.420 105 20.1 3 104 .812 1.257 1.350 1.410 2.163 2.375 2.500 2.875 124 30.1 4 158 1.250 1.767 1.860 1.920 2.163 2
9、.375 2.500 2.875 150 40.1 5 212 1.850 2.297 2.390 2.450 2.163 2.375 2.500 2.875 175 50.1 FIGURE 2 AS85028/1 TYPE J JACK SCREW CONFIGURATION (-6 THRU -10) TABLE 2 TYPE J CONSTRUCTION DETAILS TYPE J DASHNO. NO, OF CONTS WEIGHTS (GRAMS)MAX(WITH CONTACTS AND SEALS) 6 52 98 7 80 130 8 104 149 9 158 175 1
10、0 212 201 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS85028/1SHEET 3 OF 3REV. ACONNECTOR, ELECTRIC, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, PLUG,
11、 CRIMP REMOVABLE PIN CONTACTS, CLASS ETABLE 3 ENGLISH TO METRIC COVIRSIONS (SEE NOTE 2) INCHES MM INCHES MM .002 .05 1.150 29.21 .005 .13 1.250 31.75 .007 .18 1.257 31.93 .008 .20 1.350 34.29 .009 .23 1.410 35.81 .010 .25 1.562 39.67 .012 .30 1.707 43.36 .015 .38 1.767 44.88 .018 .46 1.775 45.09 .02
12、0 .51 1.780 45.21 .040 1.02 1.791 45.49 .060 1.52 1.850 46.99 .149 3.78 1.860 47.24 .156 3.96 1.900 48.26 .250 6.35 1.920 48.79 .260 6.60 2.045 51.54 .272 6.91 2.163 54.94 .436 11.07 2.275 57.79 .437 11.10 2.297 58.34 .530 13.46 2.375 60.33 .550 13.97 2.390 60.71 .554 14.07 2.420 61.46 .812 20.62 2.
13、450 62.23 .881 22.38 2.500 63.50 .997 25.32 2.761 70.13 1.090 27.69 2.875 73.03 NOTES: 1. DIMENSIONS ARE IN INCHES. 2. METRIC EQUIVALENTS (TO THE NEAREST .01 MM) ARE GIVEN FOR GENERAL INFORMATION ONLY AND ARE BASED UPON 1 INCH = 25.40 MM. 3. PIN CONTACTS USED WITH THIS CONNECTOR SHALL CONFORM TO AS3
14、9029/70. 4. SEALING PLUGS USED WITH THIS CONNECTOR SHALL CONFORM TO AS85028/4. 5. INTERFACIAL SEALS USED WITH THIS CONNECTOR SHALL CONFORM TO AS85028/3. 6. WIRE SEALS USED WITH THIS CONNECTOR SHALL CONFORM TO AS85028/5. 7. A CHANGE BAR (|) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USE
15、R IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY. Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
