SIS 35 12 15-1965 Wheels for farming and forestry《农业和林业用轮》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS SR ISO 3038-1993 Corrugated fibreboard Determination of the water resistance of the glue bond by immersion《瓦楞纤维板．通过浸泡对胶水连接的耐水性测试》.pdf

STAS SR ISO 3046-6-1990 Reciprocating internai combustion engines Performance - Part 6 Overspeed protection《往复式内燃机性能．第六部分：超速保护》.pdf

STAS SR ISO 3048-1996 Gypsum plasters - General test conditions《石膏膏药．一般测试条件 》.pdf

STAS SR ISO 3049-1996 Gypsum plasters - Determination of physical properties of powder《石膏膏药．粉末的物理性质测定 》.pdf

STAS SR ISO 3057-1993 Non-destructive testing Metallographic replica techniques of surface examination《非破坏性试验．表面检查的金相复制技术》.pdf

STAS SR ISO 3058-1993 Non-destructive testing Aids to visual inspection Selection of low-power magnifiers《非破坏性试验．目视检查的辅助手段．低功率放大器的选择》.pdf

STAS SR ISO 3069-1995 End-suction centrifugal pumps Dimensions of cavities for mechanical seals and for soft packing.《末端抽吸离心泵．机械密封和软包装的腔洞尺寸 》.pdf

STAS SR ISO 3070-0-1982 Acceptance conditions for boring and milling machines with horizontal spindle - Testing of the accuracy -Part 0 General introduction《卧式镗铣床检验条件．精度检验．第0部分：总论.pdf

STAS SR ISO 3070-3-1982 Acceptance conditions for boring and milling machines - Testing of the accuracy - Part 3 Planer type machines with movable column《镗铣床检验条件．精度检验．第3部分：带移动立柱的台.pdf