SIS SEN 24 11 08-1970 Line material Cross bracket for catch arm《线材 抓臂用十字形支架》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NACE TM0172-2001 Determining Corrosive Properties of Cargoes in Petroleum Product Pipelines (Item No 21204)《石油产品管道中货物腐蚀性能的测定 项目编号21204》.pdf

NACE TM0174-2002 Laboratory Methods for the Evaluation of Protective Coatings and Lining Materials on Metallic Substrates in Immersion Service (Item No 21206)《评估浸渍服务中金属基板的防护涂料和衬里材料.pdf

NACE TM0177-2016 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments (Item No 21212).pdf

NACE TM0183-1983 Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment (Item No 21213)《水流动环境中管类材料腐蚀控制的内部塑料涂层评估 项目编号21213》.pdf

NACE TM0185-1985 Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods by Autoclave Testing (Item No 21217)《采用高压灭菌器测试对管类材料腐蚀控制的内部塑料涂层进行评估 项目编号21217》.pdf

NACE TM0186-1985 Holiday Detection of Internal Tubular Coatings of 250 to 760 um (10 to 30 Mils) Dry Film Thickness (Item No 21218)《250至760 um(10至30 Mils)干膜厚度的内部管涂料的漏点检测 项目编号21218》.pdf

NACE TM0187-2011 Evaluating Elastomeric Materials in Sour Gas Environments (Item No 21220)《评估酸气环境中的弹性体材料 项目编号21220》.pdf

NACE TM0190-2012 Impressed Current Laboratory Testing of Aluminum and Zinc Alloy Anodes (Item No 21221).pdf

NACE TM0192-1992 Evaluating Elastomeric Materials in Carbon Dioxide Decompression Environments (Item No 21222)《评估二氧化碳解压环境中的弹性材料 项目编号21222》.pdf