1、1 Scope1.1 This standard specifies the location andwidth dimensions of the exposed areas forpicture and photographic audio on 35-mmmotion-picture prints made on continuouscontact printers.1.2 This standard is applicable to the printingof motion-picture raw stock which is cut andperforated in accorda
2、nce with ANSI/SMPTE 139or SMPTE 237.1.3 This standard refers to the adjustment of theprinter, and is in accordance with ANSI/SMPTE40.2 DimensionsThe dimensions shall be as specified in the figuresand tables.3 Additional exposed areas for photo-graphic audioIt is recognized that some formats for phot
3、ographicaudio may require exposed areas in locations otherthan or in addition to those specified by dimensions Cand D in figure 1 and table 1. Exposed areas for theseformats are given in figure 2 and table 2.NOTES1 Dimension A minus B defines the width of the picture areaexposed in accord with this
4、standard, and dimension Dminus C that of the sound track area. Thus, an overlap arearanging from 0.000 in to 0.008 in (0.00 mm to 0.20 mm) willreceive exposure from both picture and sound printingapertures. In table 2, the dimensions given for a formatdefine the width of the sound track area exposed
5、 for thatformat.2 The centerline information (dimensions E and F) given intable 1 is provided as a convenient reference. These dimen-sions are specified in SMPTE 195.for Motion-Picture Film (35-mm) Prints Made on ContinuousContact Printers Exposed Areas for Picture and AudioRevision ofANSI/SMPTE 111
6、1996SMPTE 111-2001SMPTE STANDARDPage 1 of 3 pagesApprovedJune 6, 2001Copyright 2001 by THE SOCIETY OF MOTION PICTURE AND TELEVISION ENGINEERS595 W. Hartsdale Ave., White Plains, NY 10607(914) 761-1100Figure 1 Exposed areas for picture and soundAS SEEN FROM EMULSION SIDE OF PRINTAS SEEN FROM EMULSIO
7、N SIDE OF PRINTDimensions Inches MillimetersA 1.184 0.002 30.07 0.05B 0.304 0.002 7.72 0.05C 0.192 0.001 4.88 0.03D 0.308 0.002 7.82 0.05E 0.050 nom 1.27 nomF 0.738 nom 18.75 nomTable 1 Dimensions of exposed areasFormat Dimensions Inches MillimetersRP1) A 0.078 0.002 1.98 0.05A 0.188 0.001 4.78 0.03
8、RE2) B 0.004 max 0.10 maxB 0.075+ 0.004 0.0001.90+ 0.10 0.00NRE3)C 1.302+ 0.000 0.00433.07+ 0.00 0.10C 1.373 min 34.87 min1) RP = reference perforation2) RE = reference edge3) NRE = nonreference edgeTable 2 Dimensions of additional exposed areasFigure 2 Additional exposed areasSMPTE 111-2001Page 2 o
9、f 3 pagesAnnex A (informative)BibliographyANSI/SMPTE 40-1997, Motion-Picture Film (35-mm) Release Prints Photographic Audio Records ANSI/SMPTE 139-1996, Motion-Picture Film (35-mm) Perforated KSSMPTE 195-2000, Motion-Picture Film (35-mm) Motion-Picture Prints Projectable Image Area SMPTE 237-1998, Motion-Picture Film (35-mm) Perfo-rated DH-1870SMPTE 111-2001 Page 3 of 3 pages
