SNI 06-4584-1998 Technical potassium metabisulphites《亚硫酸钾》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 2518D-2012 Thread Compound Anti-Seize Graphite-Petrolatum《石墨凡士林抗咬合复合螺纹》.pdf

SAE AMS 2521C-2001 Coating Reflection-Reducing for Instrument Glasses《反射减少用于减少反射涂料的仪器玻璃》.pdf

SAE AMS 2525D-2013 Graphite Coating Thin Lubricating Film Impingement Applied《薄膜润滑膜撞击应用石墨涂层》.pdf

SAE AMS 2526D-2013 Molybdenum Disulfide Coating Thin Lubricating Film Impingement Applied《冲击应用薄润滑油膜二氧化钼涂层》.pdf

SAE AMS 2530A-2013 Tungsten Disulfide Coating Thin Lubricating Film Binder-Less Impingement Applied《较少粘合剂影响应用薄润滑油膜的二硫化钨涂层》.pdf

SAE AMS 2545-2017 Controlled Pneumatic Needle Peening Straightening and Forming.pdf

SAE AMS 2546-2004 Laser Peening《激光喷射》.pdf

SAE AMS 2580A-2013 Shot Peening Ultrasonically Activated《超音速驱动的喷丸加工》.pdf

SAE AMS 2585A-2013 Shot Peening Media Ultrasonically Activated《超声波激活喷丸加工介质》.pdf