TS 3192-1978 NITROGEN FOR INDUSTRIAL USE《工业用氮》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ONORM M 7804 Teil 3-1983 Guidelines for the design ofwelded joints welding positions《焊接接头的设计指导 焊接位置》.pdf

ONORM M 7805-1993 Staff for welding - Classification and requirements Personnel technique de soudage - Classification et exigences《焊接人员 分类和要求》.pdf

ONORM M 7806-1983 Qualification test of weiders for welding steel pipe weiders《焊接钢焊接工的资格考试 焊管机》.pdf

ONORM M 7807-1999 Welding for house-installations - Qualification of personnel for welding of low pressure gas steel pipelines《住房安装用焊接 低压天然气钢质管道的焊接人员资格》.pdf

ONORM M 7810 Teil 1-1986 General tolerances for welding constructions dimensions for lengths and angles《焊接结构的一般公差 长度和角度的尺寸规格》.pdf

ONORM M 7810-2-1992 General tolerances for welding constructions - Form and position《焊接结构的一般公差 形位》.pdf

ONORM M 7812 Beib 2-1996 Quality assurance of welding - Additional quality requirements according to NORM EN 729-2 to -4《焊接质量保证 根据 NORM EN 729-2 to－4的附加质量要求》.pdf

ONORM M 7812-1-1996 Quality assurance of welding - Requirements for plants performing welding Operations according to quality classes《焊接质量保证 设备要求，根据质量分类的进行焊接操作》.pdf

ONORM M 7812-2-1996 Quality assurance of welding - Quality classes《焊接质量保证 质量类别》.pdf